Dip Switch Settings Configuration Diagram For Bosch Ds150i

Dip Switch 1: This switch controls the sensitivity of the sensor. The default setting is "1", which is the most sensitive setting. You can increase the sensitivity by moving the switch to "2" or "3".

Dip Switch 2: This switch controls the range of the sensor. The default setting is "1", which is the longest range. You can decrease the range by moving the switch to "2" or "3".

Dip Switch 3: This switch controls the tamper switch. The default setting is "1", which disables the tamper switch. You can enable the tamper switch by moving the switch to "2".

Dip Switch 4: This switch is not used.

The following table shows the different dip switch settings and their corresponding functions:

Dip Switch Function

1 Sensitivity

2 Range

3 Tamper Switch

4 Not used

The default dip switch settings are "1-1-1-1", which means that the sensor is set to its most sensitive setting, with the longest range, and the tamper switch is disabled.

You can find the dip switch settings diagram in the Bosch DS150I manual.

Here are some additional things to keep in mind:

The dip switch settings should be configured according to the environment where the sensor will be used. For example, if the sensor will be used in a large area, you may need to increase the range.

If you are not sure how to configure the dip switch settings, you should consult the Bosch DS150I manual.

I hope this helps! Let me know if you have any other questions.