LiftMaster RSW12V Support Question
LiftMaster RSW12V Support Question
Find answers below for this question about LiftMaster RSW12V.Need a LiftMaster RSW12V manual? We have 6 online manuals for this item!
Question posted by ginaboneso on February 23rd, 2013
Installing Gates And Only One Will Open. Using Solar.
Installing liftmaster RSW12v & RSW12vh dual gates. Usisng solar and batteries are charged. Only 1 side will open with the remote.
Current Answers
Related LiftMaster RSW12V Manual Pages
RSL12V User Manual - Page 1
Installation Date www.liftmaster.com Please contact your authorized LiftMaster dealer for all of your service needs.
USER'S GUIDE
VEHICULAR SLIDE/SWING GATE OPERATORS
RSL12V ™ & RSL12VH ™ RSW12V ™ & RSW12VH ™
Your model may look different than the model illustrated in this user's guide.
RSL12V User Manual - Page 3
... any obstructions.
When the gate is moving and a car pushes the gate. (Swing Only)
The gate hits the driveway, curb or other, and gets stuck or bent in the open the gate. NOTE: In dual gate applications the reset switch/button must be reset:
The gate is given.
When the inherent force of the remote control button will need...
RSL12V User Manual - Page 5
...-button to operate gate operator from outside by entering a 4-digit code on a specially designed keypad. Additionally, Passport™ remote controls are designed to detect an obstacle in the path of LiftMaster Security✚® and Passport™ remote controls to satisfy your authorized LiftMaster dealer for details.
3-BUTTON SECURITY✚® REMOTE CONTROL
OPEN
The 3-button...
RSL12V User Manual - Page 7
... the gate is open the gate. Model MG1300
OPEN
CLOSE
RELAY KIT
OPEN
Maglock release relay.
Ideal for use with Solar Applications. Can be released in the ground and can be connected to the operator. Model SGLOCK12V
MAGNETIC GATE LOCK Outdoor magnetic lock, transformer, junction box, mounting plate and hardware. Not for solar applications and extended battery backup)
BATTERY...
RSL12V Wiring Diagram Manual - Page 1
...Dual Gate Wiring Kit
Brown Gre
•
• J16
•
•
0 •
Mock
NC-6 -
maw
LOCK / SMART DELAY
- I Stop
To Reset Switch }
=O 74(-6 _
Cr
CTRL f ,M, •o
O
Shadow Loop
1)- 1 Interrupt Loop
e 040)
0
Chassis Ground
Ground Rod
Battery
Chassis Ground
Red
Transformer Block OR
Solar... garage.
• When the transformer ispluggedinto the convenience outlet, use ...
RSL12V Wiring Diagram Manual - Page 2
...power and battery BEFORE installing or ...Gate 2 (Secondary)
NC
NO
0
COM
Dual Gate Wiring Kit RPM Sensor
NOTE:Al connections are disconnected from the116 connector andconnected to the secondoperator.
SWING RSW12V & RSW12VH
&WARNING
To protect against fire: • Replace ONLY with fuse of same type and rating. NOTE: Do notuse amaglodc anda solenoidlock on the same installation...
RSL12V Replacement Parts Manual - Page 1
REPLACEMENT PARTS
MODEL RSW12V™ & RSW12VH™
INDIVIDUAL PARTS
ITEM PART NUMBER
1
K1A6426-2
2
K1C3196-7
3
K13-34729
4
K204B195-1
5
K20-9012B-1... with Keys
Access Door Keys
Operator Arm Assembly
Cludge Assembly
Output Arm (Solid)
Star Knob
Cludge Cover (Plastic)
Cludge Cover (Stainless Steel)
Uphill Arm Kit
7AH Battery, 12 Vdc
7AH Battery Harness
33AH Battery with Harness
KITS
...
RSW12V Install Manual - Page 1
This model is fully charged.
UL325
compliant
UL991
compliant Visit www.liftmaster.com to locate a professional installing dealer in Class I and Class II vehicular swing gate applications. THIS PRODUCT IS TO BE INSTALLED AND SERVICED BY A TRAINED GATE SYSTEMS TECHNICIAN ONLY.
RSW12V™ & RSW12VH™
VEHICULAR SWING GATE OPERATOR
INSTALLATION MANUAL
CSASOEEPALCCAAESSBORRILESE. STOP...
RSW12V Install Manual - Page 2
... of Installations Standard Installation Compact Installation Only Standard and Compact Installation
WIRING
Earth Ground Rod Power Wiring Connect Batteries Primary/Secondary Operators
ADJUSTMENT
Learn Limits Force Adjustment Test
1-7 PROGRAMMING
1 Remote Controls 2 Keyless Entry 3 Erase All Codes 4 Alternate Radio Receiver Installation
5
6-7 ADDITIONAL FEATURES
8 Timer-To-Close Auto Open Jumper...
RSW12V Install Manual - Page 3
....
• Type A -
• Type B1 • Type B2 -
COMMERCIAL/GENERAL ACCESS VEHICULAR GATE OPERATOR
A vehicular gate operator (or system) intended for use in a commercial location or building such as gate edges
I II
NOTE: UL requires that all installations must have one primary means of entrapment protection and one of the following as your secondary entrapment...
RSW12V Install Manual - Page 5
...shall not apply to gates generally used for pedestrian
horizontal swing gates:
access and to vehicular gates not to be automated.
4.1.1 Gates shall be designed, constructed and installed so as a gate support post) and the gate frame when the gate is retrofitted with a powered gate operator.
1.6 A gate latch shall not be installed on an automatically operated gate.
1.7 Protrusions shall not be...
RSW12V Install Manual - Page 7
...the gate opening and operate during full movement of the gate.
• Contact sensors MUST be located at least 6 feet (1.8 m) from the gate or ANY moving part of the gate.
• Install ... the battery or working around the battery compartment. Install enclosed-style gate tracks and roller guards.
• Place screen mesh 4 feet (1.2 m) high on the gate to the operator or gate, DO...
RSW12V Install Manual - Page 8
... monthly. Have a qualified service person make repairs to gate hardware.
• ALL maintenance MUST be performed by a LiftMaster professional.
• Activate gate or door ONLY when it can increase the risk of maintenance the area MUST be returned to persons use ONLY LiftMaster part 29-NP712 for replacement batteries.
• SAVE THESE INSTRUCTIONS.
• ALWAYS wear protective...
RSW12V Install Manual - Page 13
...). NOTE: When lifting the operator use the handle to determine the measurements and location of the concrete pad.
TOP VIEW OF OPERATOR AND GATE Gate Hinge Center
Gate Open 90°
26-1/2"
Output Shaft Center
9"
28"
24"
CONCRETE PAD AND OPERATOR ATTACHMENT Check the national and local building codes before installation.
1 Install the electrical conduit. 2 Pour a concrete...
RSW12V Install Manual - Page 17
... 7AH batteries are charged in place of the 7AH batteries. NOT AVAILABLE 3
1
2
1
NOT AVAILABLE 1
NUMBER OF CYCLES PER DAY
Single Gate Installations (16 ft. 400 lb. For best performance, the batteries should be replaced every 3 years. Always disconnect the batteries BEFORE servicing the operator.
Cycle rate may vary from solar chart for the entire day. gate)
Accessories
Dual Gate...
RSW12V Install Manual - Page 19
... of inactivity.
1
18 The programming uses a combination of buttons on the operator to start over. Pin
Handle
2
3
Learn Limit Switch
Learn Limit Cam
If a mistake is made , the safety reversal system MUST be tested. LEARN LIMIT INTRODUCTION The limits are made during the installation process.
SET OPEN LIMIT
GATE 1
SET CLOSE LIMIT
LEARN LIMITS...
RSW12V Install Manual - Page 28
... The operator arm or gate is reset, normal functions will blink in the open the gate. F. After the operator is incorrectly installed. NOTE: In dual gate applications the reset button must...E.
Gate hinges are too tight or broken and the gate is moving gate during a normal open cycle another activation of the remote control will stop a moving and a car pushes the gate. The gate hits...
RSW12V Install Manual - Page 31
...incorrectly installed. CANNOT LEARN LIMITS. GATE DOES NOT FULLY OPEN OR CLOSE WHEN TRYING TO LEARN LIMITS.
• Low or defective battery. Replace batteries ...battery connections and battery voltage to be connected for the operator remote control to the coaxial connector) is properly mated with the corresponding fuse intact.
• Low or defective battery. At least one charged battery...
RSW12V Install Manual - Page 35
.... Model SOLPNL10W12V
BATTERY FOR GATE ACCESS SYSTEMS The gate access system battery replaces or adds a battery to 450 Security✚® remote controls. Model K94-35225
SOLENOID GATE LOCK (LOW POWER) The automatic gate lock is a solenoid-driven lock that automatically unlocks when the gate is open the gate. Can be connected to the operator. Model LM202
SOLAR PANEL KIT - 10...
RSW12V Quick Start Guide Manual - Page 2
... G REMOTE CONTROLS
1 Press and release the LEARN XMITTER button (LED will stop and reverse on the output shaft (the pin must be a single, whole piece of wire. Second Operator (Optional)
Use the Dual Gate Wiring Et (refer to open and close the gate.
2 If the gate stops or reverses before reaching the fully open and close the gate.
CONNECT BATTERIES...
Similar Questions
I Have Installed A Chamberlan Garage Door Opener And The Remote I Was Using Is
I have been using a Chamberlan garage door opener and its remote has been defective since of late.Pl...
I have been using a Chamberlan garage door opener and its remote has been defective since of late.Pl...
(Posted by donweera42 8 months ago)
The Gate Remains Open At Outage
while gate is open at power outage, our dog is going to run out
while gate is open at power outage, our dog is going to run out
(Posted by wpxia 1 year ago)
Rsw12v Elite Series Will Not Open From Cabled Keypad Light Immediately Goes Red
RSW12V Elite Series will not open from cabled keypad light immediately goes red tried to put in new ...
RSW12V Elite Series will not open from cabled keypad light immediately goes red tried to put in new ...
(Posted by gpbyron 7 years ago)
How Much Power Is Used By Garage Door Reverse Sensor
(Posted by alemmadma 10 years ago)
Working Intermittantly, Beep For 5 Minutes Then Beep By Command.
I had my installer connect my opener to my gate. It worked fine for him apparently, and worked for m...
I had my installer connect my opener to my gate. It worked fine for him apparently, and worked for m...
(Posted by wellsmarka 11 years ago)