Frigidaire Dehumidifier What Size Hose

I understand you want to know what size hose to use for continuous drainage on your Frigidaire dehumidifier, model# FDF70S1. For constant drainage operation, you will need a garden hose and a drain nearby to discharge the water into.

1) Remove the bucket from your dehumidifier and set aside.

2) Lift up the side flap located on the left side of your appliance as looking from the front.

3) Insert the female threaded end of the hose through the opening.

4) Screw the garden hose onto the threaded portion of the tray underneath the bucket opening.

5) Make sure the hose is secure so there are not leaks.

6) Direct the hose toward the drain making sure that there are no kinks that will stop the water flowing.

7) Place the end of the hose into the drain.

8) Place the bucket back in your dehumidifier and make sure that it is located correctly.

9) Select the desired humidity setting and fan speed on your appliance for continuous draining to start.

Note: If your dehumidifier stops operating, check that the bucket full light is illuminated. If it is, remove the bucket and empty the contents. Then, check the seal between the hose and the drip tray. If there is a small leak then replace the hose gasket and re-tighten the hose.

I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your refrigerator status has changed successfully. Hope this is helpful.

-Best Regards-