2000 Nissan Altima Support Question
2000 Nissan Altima Support Question
Find answers below for this question about 2000 Nissan Altima.Need a 2000 Nissan Altima manual? We have 1 online manual for this item!
Question posted by Anonymous-125272 on November 22nd, 2013
Dashboard Bulbs
how to replace dashboard bulbs
Current Answers
Related Manual Pages
Owner's Manual - Page 4
... and service needs. Current odometer reading - Your NISSAN dealer is something that your NISSAN dealer cannot assist you with or you with the information on dashboard) - mainland and Alaska customers Nissan North America Inc. Honolulu, Hawaii 96819 For Canadian customers Nissan Canada Inc. 5290 Orbitor Drive Mississauga, Ontario L4W 4Z5
For...
Owner's Manual - Page 21
... allows the front air bags to be heard, followed by the release of smoke. Vehicle damage (or lack of it may not inflate in the dashboard above the glove box. However, all of the information, cautions and warnings in Canada. SSS0162
WRS0003
Supplemental front air bag system
The driver supplemental front...
Owner's Manual - Page 22
....
After turning the ignition key to the steering wheel and the instrument panel assembly by placing material over the steering wheel pad and above the dashboard, or by installing additional trim material around the supplemental front air bag system. Those with the use of seat belts, help to cushion the impact...
Owner's Manual - Page 24
... 1-17 Tampering includes changes to have the pre-tensioner system checked and, if necessary, replaced by installing additional trim material, such as seat covers, around the side air bag system... bag, etc.) between the front door finisher and the front seat. It must be replaced together with yellow insulation either just before the harness connectors or over the complete harness for...
Owner's Manual - Page 27
... air bag module will not operate in an accident. The air bag module should always be replaced. As a reminder, unless it could cause personal injury.
1-20 Seats, restraints and supplemental ...the supplemental front air bag or supplemental side air bags may not operate properly. Repair and replacement of manufacture as noted on the certification label located on , it is any of a ...
Owner's Manual - Page 29
...dealer. ● All seat belt assemblies including retractors and attaching hardware should also be replaced together with all doors closed and all seat belt assemblies in the system. NISSAN recommends ...that all seat belts fastened, it cannot be reused and must be inspected and replaced if either damage or improper operation is noted. ARS1047
ARS1050
● Be sure the ...
Owner's Manual - Page 35
... on the webbing is required. Also, do not put the same seat belt around both your child. An inflating supplemental front air bag could be replaced. See your lap. Wipe the shoulder belt guide with NISSAN seat belts. ● Persons who can result in the shade. Failure to use could result...
Owner's Manual - Page 47
... and controls
Meters and gauges ...2-2 Speedometer and odometer ...2-3 Tachometer ...2-4 Engine coolant temperature gauge...2-4 Fuel gauge ...2-5 Warning/indicator lights and chimes ...2-6 Checking bulbs...2-6 Warning lights...2-6 Indicator lights ...2-8 Chimes ...2-9 Security systems ...2-10 Nissan vehicle immobilizer system (NVIS) ...2-10 Enhanced immobilizer security system (if so equipped...
Owner's Manual - Page 53
... serious damage to come on during normal driving, pull off the road in the ''Do-it may indicate a burned-out bulb or an open warning light
Low fuel warning light
CHECKING BULBS
With all doors closed, apply the parking brake and turn the ignition key to indicate a low oil level. The following...
Owner's Manual - Page 55
..., and start it may cause the ABS light to the OFF position. Both lights flash when the hazard switch is depressed. When a brake pad requires replacement, it could be working properly if the warning light is below the MINIMUM or MIN mark on
Brake pad wear warning
The disc brake pads...
Owner's Manual - Page 138
... indicates that road conditions are close to 10 km/h). When the self-test occurs, you may hear a ''clunk'' noise and/or feel a pulsation in the dashboard. ANTI-LOCK BRAKE SYSTEM (ABS) (if so equipped)
The anti-lock brake system installed in forward or reverse. Avoid driving the vehicle at speeds below...
Owner's Manual - Page 187
...-sealed beam type which uses a replaceable halogen bulb. Dust, moisture, smoke, etc. Remove the bulb from the headlamp assembly just before a replacement bulb is not necessary after replacing the bulb. Remove the four screws from the vehicle for bulb replacement, it -yourself
Never touch the glass envelope. The bulb may affect bulb performance. Because the headlamp assembly must...
Owner's Manual - Page 188
... and that the vehicle is unloaded (except for full levels of the tires inflated to install new bulb. d. Have the driver or an equivalent weight placed in the driver's seat. b. Place the ... . 2. Adjust the vertical aim by pulling it straight out of the bulb socket (see above illustration). 6. c. Do not shake the bulb when removing it -yourself
8-25 Remove the three nuts and one bolt ...
Owner's Manual - Page 190
Follow the instructions in the illustration. ● Basic illuminating area should be within the range shown. FRONT PARKING AND CORNERING LAMP Replacing the front parking and cornering lamp bulb
1. Disconnect the negative (-) battery cable. Rotate the socket counter-clockwise and pull it out of the front fender protector (see above illustration) and position...
Owner's Manual - Page 191
...assembly (see above illustration). 4. Do not shake the bulb socket when removing it out of the front fender ...bulb sockets. 5. Remove the four screws from the front of the socket. 7. Follow the instructions in -lb (4.1 to install new bulb.
2. Headlamp mounting nuts and bolt torque: 36 to 47 in reverse order to 5.3 N⅐m)
FRONT SIDEMARKER LAMP Replacing the front sidemarker lamp bulb...
Owner's Manual - Page 192
... in -lb (4.1 to 5.3 N⅐m)
FOG LIGHTS Replacing the fog light bulb
LDI0010
3. Do-it out of the headlamp assembly. Rotate the socket counter-clockwise and pull it -yourself
WDI0003
8-29 Pull the headlamp assembly evenly away from the front of the socket. 7. Do not shake the bulb socket when removing it. 6. Headlamp mounting...
Owner's Manual - Page 193
... 5 18 8 10 3.4 1.1 3156K 3157K 921 168 921 68 578 158 658 65/55 30 27/8 3.8 37.5 HB5 (9007) 3457AK 4157K or 3157K 194 881L Wattage (W) Bulb No.
8-30 Do-it-yourself
Owner's Manual - Page 194
ADI1049
Replacement procedures
All other lights are either type A, B, C or D. WDI0002
Do-it-yourself
8-31
When replacing a bulb, first remove the lens and/or cover.
Owner's Manual - Page 236
......5-18 Brake warning light ...2-7 Brake wear indicators ...2-8, 8-20 Parking brake check ...8-19 Parking brake operation ...5-13 Self-adjusting brakes ...8-20 Break-in schedule ...5-15 Bulb check/instrument panel ...2-6 Bulb replacement...8-30 C Capacities and recommended fuel/ lubricants...10-2 Car phone or CB radio ...4-24 Cargo net ...2-25 Cargo (See vehicle loading information) ...10-13...
Owner's Manual - Page 238
... SRS) ...1-19 License plate Installing the license plate ...10-13 Light Air bag warning light ...1-14, 1-19, 2-7 Brake light (See stop light) ...8-33 Bulb check/instrument panel ...2-6 Bulb replacement...8-30
Charge warning light ...2-7 Cornering light ...2-18 Front fog light switch ...2-18 Headlight and turn signal switch ...2-16 Heater Heater and air conditioner controls...
Similar Questions
How To Replace 2004 Nissan Altima Center Cluster Bulbs
(Posted by Molor 10 years ago)
How Do I Replace My License Plate Bulb On A 2001 Altima
(Posted by hgooddwor 10 years ago)
Dashboard Lights Not Working
If my dashboard lights are not working where is the fuse so i can check and see if it needs to be re...
If my dashboard lights are not working where is the fuse so i can check and see if it needs to be re...
(Posted by jesuslivesnme 11 years ago)
How Do I Change The Check Engine Light Bulb In My 1999 Altima?
(Posted by mpotts 11 years ago)