Dewalt DCW210B Support Question

Find answers below for this question about Dewalt DCW210B.
Need a Dewalt DCW210B manual? We have 1 online manual for this item!

Dewalt Overview Questions Manuals Reviews Videos Research

Question posted by geoffbrightgb on June 22nd, 2023

Sanding Pad Doesn't Spin With Belt On

I was wondering if someone could help me out yesterday. I received my the wall sander was playing with it this morning. And realized the pad does not spin. I took it apart, took the Both off and it spun freely with no problem. I put the bell back on it. Stop spinning even if I loosen the tensioner.

I Know the Answer!

I have the same question
Request More Information

Current Answers

Answer #1: Posted by SonuKumar on June 22nd, 2023 10:40 AM

This answer was accepted by the poster of the original question.

SonuKumar

Member since:
May 9th, 2021

Points: 16,653,150

1,100
points

https://www.manualslib.com/manual/101833/Memorex-Mlt3221.html?page=50#manual

If you're experiencing issues with the pad not spinning on your Dewalt DCW210B sander, there are a few things you can check and try to troubleshoot the problem:

Verify proper assembly: Ensure that you have reassembled the sander correctly after taking it apart. Double-check that all the components, including the pad, bell, and tensioner, are properly aligned and secured. Make sure there are no loose or missing parts.

Check the sanding pad: Inspect the sanding pad for any debris, damage, or uneven wear. If the pad is damaged or worn out, it may not provide sufficient grip or contact with the surface, causing it to stop spinning. Consider replacing the sanding pad if necessary.

Check the drive belt: The Dewalt DCW210B sander uses a drive belt to transfer power from the motor to the pad. Examine the drive belt for any signs of damage, such as cracks or wear. If the drive belt is damaged or worn, it may need to be replaced. Consult the user manual or contact Dewalt customer support for guidance on replacing the drive belt.

Inspect the tensioner: The tensioner is responsible for maintaining the appropriate tension on the drive belt. Ensure that the tensioner is adjusted correctly and providing sufficient tension. If the tensioner is not properly engaged or if it's damaged, it may cause the pad to stop spinning. Try adjusting the tensioner and see if it resolves the issue.

Power source and switch: Confirm that the sander is receiving adequate power from the power source. Check the power cord for any damage or loose connections. Additionally, ensure that the power switch is in the "on" position and functioning properly.

If you have tried these troubleshooting steps and the pad still does not spin, it is advisable to contact Dewalt customer support or consult a professional technician for further assistance. They will be able to provide specific guidance or arrange for a repair if necessary.

Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful.

Regards,
Sonu
Your search handyman for all e-support needs!!

Related Dewalt DCW210B Manual Pages

Instruction Manual - Page 3

...1 On/Off switch 2 Speed control dial 3 Dust port 4 Dust bag 5 Dust bag collar 6 Sanding pad 7 Battery pack WARNING: Read all safety warnings and all instructions. Fig. Failure to follow the warnings ...safety alert symbols and words to alert you have any questions or comments about this or any DeWALT tool, call us toll free at: 1-800-4-DeWALT (1-800-433-9258). 1 DANGER: Indicates an imminently...

Instruction Manual - Page 4

..., non-skid safety shoes, hard hat, or hearing 2 protection used . h ) Do not let familiarity gained from the power tool before use a power tool while you to rain or wet conditions. Properly maintained cutting tools with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. c ) Keep children and bystanders away while operating...

Instruction Manual - Page 5

...seek medical help. f ) Do not expose a battery pack or tool to Take When Sanding Paint for Sanders • Always wear eye protection and a respirator when sanding. • Sanding of the tool in moving...on replacing the belt, see Replacing the Sanding Pad and the Belt under Maintenance. See Precautions to fire or excessive temperature. Also use . Use of the power tool for safe ...

Instruction Manual - Page 6

... flame. WARNING: Fire hazard. When ordering replacement battery packs, be put in aprons, pockets, tool boxes, product kit boxes, drawers, etc., with a hammer, stepped on baggage UNLESS they are as...and cause a short circuit. So when transporting individual battery packs, make sure that has received a sharp blow, been dropped, run over the open the battery pack for recycling. ...

Instruction Manual - Page 7

... Gauge) for "Shipping". For more capacity than the cord when disconnecting the charger. Help protect our environment and conserve natural resources by returning the spent nickel cadmium, nickel metal...DO NOT attempt to place spent nickel cadmium, nickel metal hydride or lithium-ion batteries in a tool, the pack will reduce the risk of electric shock. • An extension cord must be ...

Instruction Manual - Page 8

... resulting in personal injury and property damage. Always unplug the charger from the power supply when there is fully seated in doubt, use it has received a sharp blow, been dropped or otherwise damaged in excessive internal heat. The red (charging) light will reduce the risk of injury, charge only DeWALT rechargeable...

Instruction Manual - Page 9

... sander is approximately 65 °F - 75 °F (18 ° - 24 °C); If the charger indicates a problem, take the tool, battery pack and charger to the touch while charging. If this manual for sanding...INSTRUCTIONS FOR FUTURE USE COMPONENTS (FIG. This feature ensures maximum battery pack life. Wall Mounting DCB107, DCB112, DCB113, DCB115, DCB118, DCB132 These chargers are blocked. ...

Instruction Manual - Page 10

.... While holding the sander, fit the dust bag collar 5 to be connected; This will not affect sanding performance but will wear very rapidly if left in place. The recommended DWE64233 sanding discs are not to the dust port 3 as speed increases. Hold the pad with the work surface while the tool is facing upward. 2. and...

Instruction Manual - Page 11

... and Removing the Battery Pack (Fig. Pushing down on them. 2. Be sure to the difficulty of material being sanded, letting the sander do the work area where dust would settle on the tool while sanding actually slows the removal rate and produces an inferior quality surface. To produce the best finish possible, start with...

Instruction Manual - Page 12

... injury. The belt and the sanding pad 6 are not serviceable. WARNING: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement, when applicable) should be performed by children should be kept away from your product. • CONFIRMATION OF OWNERSHIP: In case of along with this tool could be consumable...

Instruction Manual - Page 13

...warranty information. no questions asked. This warranty does not apply to the warranty, DeWALT tools are not completely satisfied with the performance of your product will allow limitations on how long... or the exclusion or limitation of purchase. • FOR YOUR SAFETY: Registering your DeWALT Power Tool, Laser, or Nailer for free, any time during the first year after purchase. 2 YEARS ...

Instruction Manual - Page 40

... that the battery pack is based on the surface of the tool. Bluetooth® NOTE: The Bluetooth® word mark and logos are trademarks for more DeWALT power tools: the yellow and black color scheme, the "D" shaped air ... * M aximum initial battery voltage (measured without a workload) is under license. DeWALT Industrial Tool Co., 701 East Joppa Road, Towson, MD 21286 (Jul18) Part No.