Frigidaire GLTF2940FS Support Question
Frigidaire GLTF2940FS Support Question
Find answers below for this question about Frigidaire GLTF2940FS - 3.5 cu. Ft. Front Load Washer.Need a Frigidaire GLTF2940FS manual? We have 3 online manuals for this item!
Question posted by timcfoulke on February 17th, 2013
Interrupted Wash Cycle
my washer won't complete a full cycle w/o repeated restarts
Current Answers
Answer #1: Posted by OnlineOutreachSpecialist on February 19th, 2013 1:20 PM
OnlineOutreachSpecialist
Member since:
March 30th, 2011 Points: 2,848,320
Member since:
March 30th, 2011 Points: 2,848,320
Hello timcfoulke - Sounds like the washer could be experiencing a communication error with main control board, faulty door lock assembly, pump or the timer itself is not operating correctly. Is the unit making a humming noise? If so, either the drain hose or pump is clogged and needs to be cleaned. Does the washer display an error code? Try pressing and holding the START and PAUSE/CANCEL button simultaneously. All LED’s will go blank and after a few seconds the control will signal the stored code using audible beeps and blinking LED’s. The control will repeatedly signal the code, as long as the START and PAUSE/CANCEL buttons are pressed. A two second pause between repeats affords you the ability to make accurate counts to identify an error (if one displays).
Online Outreach Specialist
Related Frigidaire GLTF2940FS Manual Pages
Use and Care Guide - Page 2
.... These words mean:
DANGER You can be used when elevating the washer for ease of use accessories certified by the safety alert symbol and the word "...DANGER" or "WARNING". Table of Contents
IMPORTANT SAFETY INSTRUCTIONS ...3-4 Washing Procedures ...4-6 Stain Removal ...6-7 Common Washing Problems ...8 Care and Cleaning ...9 Avoid Service Checklist ...10 Warranty...11 ...
Use and Care Guide - Page 3
...washer, the electrical power cord of electric shock, disconnect this washer. This will automatically restart after the washer is used for installer's reference. Protect Children •Do not allow the drum to coast to a complete... washer must be plugged into the washer while parts are packed in serious personal injuries. Before loading, unloading or adding items, push in the cycle ...
Use and Care Guide - Page 4
...buckles, and other household chemicals such as a bedspread can be washed separately. • The washer can be tightly packed. Load large items first. Do not use or mix liquid chlorine bleach...bag to prevent tangling during the wash cycle. • Turn knit items inside out to follow fabric care and laundry product labels. This also helps protect other loads and cause skin irritation.
2....
Use and Care Guide - Page 5
...washer drum as it is part of the normal operation of the cycle. Fill to automatic dispenser following these steps:
A. Do not exceed the maximum fill line.
Look
for small loads... load or into the compartment labeled "Fabric Softener" and marked with this symbol
on the wash load... and pour it stops. • After adding laundry products, slowly close the dispenser drawer. 5. OPENING...
Use and Care Guide - Page 6
... Con't
6. Start the washer. (See Operating Instructions for colorfastness by fabric care label. Stain Removal
Safe Stain Removal Procedures
To reduce the risk of fire or serious injury to type, size, and soil level of
children's reach. • Thoroughly wash any time. Follow fabric care label instructions. Remove items when the cycle is completed.
Use and Care Guide - Page 7
...Pretreat with a paste of an entire load, use on paper towels.
Soak for fabric. Place stain face down on paper towels. Wash using hottest water safe for fabric. ...stain is wet. Pretreat. Wash using product containing enzymes.
Badly mildewed fabrics may be permanently damaged. Wash using cold water and bleach safe for fabric. Repeat, replacing paper towels frequently....
Use and Care Guide - Page 8
...Load washed too long.
Wrinkling
•Overloading the washer. •Incorrect wash cycle for wash
load.
•Reduce load size. •Rinse in cold water with lint brush or roller.
•See Washing...wash load.
•Do not overload washer. •Use correct temperature and amount of detergent, hottest
water and bleach safe for a few
minutes to fabric.)
•Pilling is completed...
Use and Care Guide - Page 9
... completed, wipe top and sides of washer with a mixture of cardboard or thin fiberboard under the front leveling legs to the washer:
1. Drain any of the cleaning items mentioned for cold weather care. Store washer in the dispenser drawer. Replace drawer. 8. Plug electrical cord into the left in 1 quart (.95 L) water]. Do not add wash load...
Use and Care Guide - Page 10
...whine is restarted, objects may be in pump. If noise continues after washer is normal during the spin cycle. To prevent unnecessary noise and damage to help balance the load. •... or sink.
• Washer is too small. Close door completely. Shake or brush excess dirt and sand from washer. Stop washer and redistribute wash load. Stop washer and rearrange wash load. There may be at ...
Operating Instructions - Page 1
...washer Owner's Guide. Just turning the knob to select the cycle.
To reduce the risk of fire, electric shock or injury to ensure best washing results.
1. Sort laundry into loads that cycle is available with the estimated cycle...START to resume the cycle. • If the cycle is a result of siphoning action and part of the cycle is interrupted during the entire wash cycle and the Door Lock ...
Operating Instructions - Page 2
... normal reversing tumble wash action are not available with a complete wash cycle suitable for that must be laundered quickly, followed by 2 rinses and a stow finat spin. Water will produce flashing indicator lights and/or beeping with a no-iron finish followed by 2 rinses and a finat spin.
Bulky This cycle is not appropriate for the load and a full...
Operating Instructions - Page 3
...
Sport
Bulky
Soak
Touch Up Rinse Spin Drain Spin
Estimated Cycle Duration **
49minutes
44 minutes
31 minutes
32 minutes 30 ...¢
• Factory Settings ,/ Available settings
,/
,/
,/
v_
v_
v_
¢
¢
,/
** Estimated cycle duration is based on factory settings and does not include water fill times, out-of-balance
,/
,/
or oversudsing conditions.
PN 134848800
v_
...
Installation Instructions - Page 1
...Installation Requirements Electrical Requirements Grounding Requirements Water Supply Requirements Drain Requirements Rough-In Dimensions Location Of Your Washer Unpacking Installation Replacement Parts
PAGE
2 2 2 2 2 3 4 4-5 5-6 6
Installation ....
WHAT TO DO IF YOU SMELL GAS · Do not try to the washer must be followed to minimize the risk of fire or explosion or to prevent property...
Installation Instructions - Page 2
... capabilities, the use hose P/N 134889610, available from an authorized parts distributor.
2 Carpenter's level. NOTE: Because of this washer with a properly grounded three prong grounding type receptacle. OUTLET RECEPTACLE - NOTE: GFI (Ground Fault Interrupter) receptacle is in a risk of eliminating 17 gals (64.3 L) per square inch (maximum unbalance pressure, hot vs.
DRAIN...
Installation Instructions - Page 4
... dotted line along the bottom. Using a rug, blanket or piece of 1/2 in.
LOCATION OF YOUR WASHER
DO NOT INSTALL YOUR WASHER: 1. In an area (garage or garage-type building) where gasoline of the floor may be below ...60 ° F
(15.6 ° C) for proper washer (detergent breakdown) operation.
2. per foot (1.27 cm per 30.5 cm).
Base
Shipping Plug The...
Installation Instructions - Page 5
... hand, then tighten another 2/3 turn with pliers. Tighten by hand, then tighten another 2/3 turn with the pedestal. Carefully return the washer to within 4 feet (122cm) of the washer and install the rubber washers in it's
final position, place a level on and check for leaks. Keep the leveling leg extension at a later date, the...
Installation Instructions - Page 6
... and caution MUST be used when elevating the washer for ease of the washer.
Failure to ensure the power is unpacked. Run the washer through a complete cycle. Turn on the inside of use accessories certified by the manufacturer could result in washer tub) to the standpipe, inlet hose, laundry tub, etc. NOTE: A wiring diagram and technical data...
Similar Questions
Wash Cycle/codes
My washer fills & agitates, but will not drain or spin. then a code comes up e20. Not sure what ...
My washer fills & agitates, but will not drain or spin. then a code comes up e20. Not sure what ...
(Posted by nicolemnelson2008 8 years ago)
Frigidaire Front Load Washer Won't Start Rinse Cycle
(Posted by viatono 10 years ago)
Front Load Washer Will Not Complete Final Spin
(Posted by pagnj3r 10 years ago)
Normal Wash Cycle......
what is the normal time for the normal wash cycle...mine is 53 min...is that normal
what is the normal time for the normal wash cycle...mine is 53 min...is that normal
(Posted by kyref45 11 years ago)
Why Does The 'er Uo' Message Always Come On And Stop The Wash Cycle?
dishwasher GGHD2433KF model Frigidaire----the er uo message always comes on and stops the cycle. Wha...
dishwasher GGHD2433KF model Frigidaire----the er uo message always comes on and stops the cycle. Wha...
(Posted by luciestanr1 12 years ago)