How Change The Projector 180

To change the projector 180 on a HoMedics SS-5075 projector, follow these steps:

Disconnect the projector from the power source.

Locate the projector's lens cover. It is usually located on the front of the projector.

Open the lens cover.

Locate the projector's projection lens. It is usually located behind the lens cover.

Loosen the screws that hold the projection lens in place.

Rotate the projection lens 180 degrees.

Tighten the screws that hold the projection lens in place.

Close the lens cover.

Connect the projector to the power source and turn it on.

The projector should now be projecting the image 180 degrees rotated.

If you are not comfortable changing the projector 180 yourself, you can contact a HoMedics customer support representative for assistance.

Here are some additional tips for changing the projector 180 on a HoMedics SS-5075 projector:

Be careful not to touch the projection lens with your fingers. The oils from your fingers can damage the lens.

If the projection lens is dirty, you can clean it with a soft, dry cloth.

Make sure that the projector's screws are tightened securely before you turn on the projector.

If you are projecting the image onto a wall, you may need to adjust the projector's keystone setting to correct the image distortion.

You can also use the projector's zoom feature to adjust the size of the projected image.

---

Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful.

Regards,
Sonu
Your search handyman for all e-support needs!!

To change the projector's orientation to upright, follow these step:

1. Turn off the projector and unplug it from the power source.

2. Carefully place the projector on a stable surface, ensuring that it is facing the desired projection area.

3. Locate the keystone adjustment buttons on the projector. These buttons are usually labeled with arrows or icons.

4. Press the keystone adjustment button labeled "Up" or "Down" to adjust the projection angle.

5. Continue adjusting until the projected image appears right-side up. If the keystone adjustment buttons are not available on your model or if this method doesn't work, you might need to access the projector's settings through the menu system. Here's how to do that:

1. Turn on the projector and allow it to display an image.

2. Look for a "Menu" or "Settings" button on either the projector or the remote control.

3. Press the "Menu" or "Settings" button to access the projector's menu system on the screen.

4. Navigate through the menu using the arrow keys on the remote control or the projector itself.

5. Look for an option related to projector orientation or image flip.

6. Select and enter the option, then choose the upright or normal orientation.

7. Exit the menu system and the projector should now project the image right-side up.

If you're still having trouble, I recommend checking the user manual specific to your HoMedics SS-5075 model. The manual will provide you with detailed instructions on changing the projector orientation.

---

"Hi there,

I hope my response was helpful in addressing your question or concern. If you found it valuable, I kindly ask you to consider accepting my answer by clicking the designated button. Your support will not only acknowledge my efforts but also guide others in finding useful solutions. Thank you for your trust and I'm ready to assist you further if needed.

Best regards,
Technicalproblemsolver"