Hunter 28672 Support Question
Hunter 28672 Support Question
Find answers below for this question about Hunter 28672.Need a Hunter 28672 manual? We have 4 online manuals for this item!
Question posted by jeh29438 on May 20th, 2012
Where Can I Find A Blade Arm??
I need just one blade arm for the 28672.
jim herlong 906 crawford drive, Edisto Island,Sc
Current Answers
Related Hunter 28672 Manual Pages
Installation Guide - Page 1
... fan blade tips.
• e fan is positioned to allow you cannot lock the circuit breakers in contact with the rotating fan blades during normal operation.
• e fan blades are...support brace.
4-3.
Locate the site for Existing Fan Site
If you to recess the outlet box a minimum of outlet box. Tools and Supplies You May Need
• Drill • Keyhole saw •...
Owner's Manual - Page 1
Model Name
Model No. For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Date Purchased
Where Purchased
Type 2 Models
Owner's Guide and Installation Manual
English
Español
Form# 45068-01 200100519 ©2010 Hunter Fan Co.
Owner's Manual - Page 2
... warning device, such as a tag, to supply you complete instructions for many years.
Never insert foreign objects between rotating fan blades. • To reduce the risk of our work. Before installing your fan, for Ceilings 9
Feet or Higher 8 4 •Wiring the Fan 9 5 • Installing the Canopy and Canopy
Trim Ring 10 6 • Assembling the...
Owner's Manual - Page 3
... through the inner holes of outlet box.
• e outer holes of the outlet box are aligned with the rotating fan blades during
normal operation.
• e fan blades are essential for your existing fan site is suitable, skip ahead to determine if the site is directly below a joist or support brace that will hold...
Owner's Manual - Page 4
....
Locate the site for the ceiling hole directly below the joist or support brace that the fan supply line extends at any hardware store or electrical supply house.
4-2. Cut a 4" diameter ... fasten a prominent warning device, such as follows:
3-1. You have now successfully prepared your fan manual and continue with an approved connector, available at least 6" beyond the box.
5-3. Make...
Owner's Manual - Page 5
... downrods. For quiet and optimum performance of two ways, depending on ceiling height and your Hunter fan, use the accessories, follow the instructions included with each product. The steps in one of your...Hunter's patented 2-position mounting system provides you can install your Hunter fan in this manual include instructions for a vaulted or angled ceiling
5 45068-01 • 05/19/10 &#...
Owner's Manual - Page 6
... installing more than one fan, keep the fan blades and blade irons (if applicable) in sets, as they were shipped.
6 45068-01 • 05/19/10 • Hunter Fan Company
1 • Getting Ready
To install a ceiling fan, be sure you begin installing the fan, follow all the instructions in "Preparing the Fan Site." If you need the following : •...
Owner's Manual - Page 7
...
Steps 2-2 - 2-4
Ceiling Peak Large Opening
LEFT
Step 2-3 (Angled Ceiling Only)
7 45068-01 • 05/19/10 • Hunter Fan Company
RIGHT Note: Your fan comes with the pilot holes you are installing the fan on each other. Thread the lead wires from each of the hanger bracket.
2-3.
Drill two pilot holes into the...
Owner's Manual - Page 8
... side of the metal dowel pin inside the dowrod.
3-3.
the coating prevents the downrod from the fan through the downrod. Raise the fan and place the ball into place.) Go to 4 • Wiring the Fan. Steps 3-4 - 3-5
WARNING: Fan may fall if not assembled as shown Steps 3-1 - 3-3 in steps 3-1 - 3-3.
3-1.
Note: Make sure all the wires...
Owner's Manual - Page 9
...from the ceiling to the black (ungrounded) and the black/white wire (ungrounded) from the fan
CAUTION: Be sure no bare wire or wire strands are not included. Connect the remaining wires ...box.
4-7.
Wire Connector
9 45068-01 • 05/19/10 • Hunter Fan Company 4 •Wiring the Fan
All wiring must be in accordance with national and local electrical codes.
4-1. Before attempting...
Owner's Manual - Page 10
... the hanger bracket. Securely tighten all four screws.
5-5.
Steps 5-1 - 5-2 Canopy
Should you need to secure the canopy.
Twist canopy trim ring clockwise to remove the canopy trim ring, follow ...Step 5-3
Step 5-5
Canopy Screw
10 45068-01 • 05/19/10 • Hunter Fan Company Twist canopy trim ring counter clockwise until it releases from canopy. Install third & fourth ...
Owner's Manual - Page 11
... or any residue, as they will damage the protective Dust Armor on the blades. Attach each blade, insert one blade mounting screw through the blade iron, and attach lightly to the fan. If you used grommets, the blades may include blade grommets. Note: Some blade mounting screws are tightened. Use a dry or slightly damp lint free cloth to...
Owner's Manual - Page 12
...the Light Fixture" on step 7-11. If you do not want to uninstall it now. Once you need to install the light fixture, proceed with OR without the included light fixture. WARNING: Use only the ...through the center opening of the keyhole slots. If you the option of installing the fan with step 7-6 now. This feature gives you want to install the light fixture, you have uninstalled ...
Owner's Manual - Page 13
... lower switch housing to the upper switch housing with US federal energy regulations, this ceiling fan contains a device that restricts its light output. Metal Disk Metal Rod
Glass Bowl
Cover ...Plate Finial
13 45068-01 • 05/19/10 • Hunter Fan Company Installing the Glass Bowl
7-8. Steps 7-6 - 7-7
Plug Connector
Lower Switch Housing Housing Assembly Screw...
Owner's Manual - Page 14
... Switch Housing
Screw
Step 7-13
Male Dummy Terminal
Female Dummy Terminal
Cap Plug Button
Step 7-16
14 45068-01 • 05/19/10 • Hunter Fan Company Disconnect the plug connectors between the black wire and the Black/White wire.
7-12. Install the switch housing cap and plug button to the...
Owner's Manual - Page 15
... likely to a complete
any
To Change Airflow Direction
other cleaners that separates if the chain is jerked. Ceiling fans work best by blowing air downward (counterclockwise blade rotation) in sequence: High, Medium, Low, Serenity Speed, and Off. • Pull the chain slowly to change settings. • Release slowly to prevent the chain...
Owner's Manual - Page 16
...Problem: Lights shut off suddenly, but fan is engaged. 5. If you need parts or service assistance, please call 888...‑830‑1326 (In Canada, call 866-268-1936) or visit us at our Web site at the wall switch. 9 • Troubleshooting
Problem: Nothing happens; Loosen canopy, check all the blades. Remove the shipping bumpers. If your fan...
Parts Guide - Page 1
... Wood Screw Canopy Screw
Mounting Isolator
Hanger Bracket Assembly
Balancing
x 1
Kit
Wire
x 4
Connector
x 11 x 16 x 16
Screw, Blade Iron Armature
Screw, Blade Assembly
Blade Grommet
Screw, Switch
x 3
Housing Assembly
Screw,
x 3
Machine, 6-32
Blade Assembly
Switch Housing Assembly
Fan Parts
(Not Drawn to Scale)
PARTS GUIDE
Using this Parts Guide, make sure all parts are missing...
Similar Questions
I Have7 Ceiling Fan Mod. 21617 Need Remote If Anyoneknow Replacement
(Posted by baljitsbrar 2 years ago)
Fan Blade Brackets
I need the fan blade brackets for my hunter 28672 I broke one. Where could I find the one for this f...
I need the fan blade brackets for my hunter 28672 I broke one. Where could I find the one for this f...
(Posted by mamagryz 2 years ago)
Where Can I Find Blade Irons For Hunter Fan 23765 Palomar?
(Posted by Anonymous-132949 10 years ago)
I Have A Older Hunter Fan That I Need A Globe For. It The One With The Chain
(Posted by evanthomas 12 years ago)