Husqvarna 440 e-series Support Question
Husqvarna 440 e-series Support Question
Find answers below for this question about Husqvarna 440 e-series.Need a Husqvarna 440 e-series manual? We have 3 online manuals for this item!
Question posted by ray361619393 on January 2nd, 2021
Husqvarna 440e Won't Start
I cannot get a rarely used 440e to start. The spark plug is soaking wet. I replaced the plug with another brand new NGK, drained and refilled gas with known good gas. Spark plug has nice white spark and gap is at .020. Muffler is not clogged, carb filter is clean. Good compression, but still only backfires from time to time, even after I take the plug out, dry it, try to start it with starting fluid and no choke.Acts like a stuck float which it doesn't have!
Current Answers
Answer #1: Posted by Odin on January 2nd, 2021 11:06 AM
Odin
Member since:
April 10th, 2010 Points: 41,236,620
Member since:
April 10th, 2010 Points: 41,236,620
See Winter use at https://www.manualslib.com/manual/589063/Husqvarna-440-E-Series.html?page=29&term=running+problems&selected=1#manual.
If the issue persists or if you require further advice--or if the instructions don't seem to apply--you'll have to consult the company; use the contact information at https://www.contacthelp.com/husqvarna/customer-service.
Hope this is useful. Please don't forget to click the Accept This Answer button if you do accept it. My aim is to provide reliable helpful answers, not just a lot of them. See https://www.helpowl.com/profile/Odin.
Related Husqvarna 440 e-series Manual Pages
Owners Manual - Page 7
...start /stop switch automatically returns to run position. Ignition; This should always use can be avoided.
Please read the operator's manual carefully and make starting the machine. In order to prevent unintentional starting, the spark plug...of the operator′s hands must be removed from the spark plug when assembling, checking and/or performing maintenance. NB!
Chain...
Owners Manual - Page 9
...PRECAUTIONS Before using a new chain saw 11 Important 11 Always use common ...STARTING AND STOPPING Starting and stopping 20 WORKING TECHNIQUES Before use 22 General working instructions 22 How to avoid kickback 25 MAINTENANCE General 26 Carburetor adjustment 26 Checking, maintaining and servicing chain saw safety equipment 26 Muffler 27 Starter 27 Air filter 28 Spark plug...
Owners Manual - Page 10
.... In 1956, the first motor driven lawn mowers appeared, followed by chain saws in the world of forest and garden products, with your choice to modify the design ...For customer assistance, contact us at our website: www.usa.husqvarna.com
What is working today. By following its′ content (using a Husqvarna product.
The location was logical, since water power was ...
Owners Manual - Page 11
...used carelessly or incorrectly and
can
result in serious personal injury or the
death of the operator or others . WARNING!
WARNING! WARNING! loaded stop switch and can result in a
! Therefore remove the spark plug... Long-term exposure to use approved hearing protection. authorized accessories or replacement
parts.
Never allow children to noise can be started by trained and quali...
Owners Manual - Page 19
...spark plug cap from the refuelling area before starting . Always stop the engine and let it .
• Never start... the machine:
1 If you have spilled fuel or chain oil on yourself or your clothes, change your local gas... the fuel cap. You should be replaced at the same time. (48)
... by shaking the container before refuelling. Never use a machine with fuel.
The capacities of...
Owners Manual - Page 21
... possible, this grip.
The start . This prevents unnecessary wear to idle a few seconds before giving full throttle. There is a simplified start up, the spark plug cap must be dangerous if ...the saw handles.
Use a firm grip with thumbs and fingers encircling the chain saw . (52)
• Never start the machine indoors. STARTING AND STOPPING
440e TrioBrake, 445e ...
Owners Manual - Page 27
...
Never use a machine with a muffler that is not damaged and that the return springs work properly. (97)
• Start the ...away from the spark plug when assembling, checking and/or performing maintenance. Wear protective glasses and protective gloves. Replacing the starter cord...forward onto the front hand guard. Insert and secure a new starter cord in the rim of the starter cord on...
Owners Manual - Page 28
... can be replaced. A HUSQVARNA chain saw ...the electrode gap is pulled... spark plug can be replaced after taking any further action.
Always use for...spark plug is low on the spark plug electrodes, which may result in the starter housing and the starter handle. The filter must be replaced with recoil spring in order to avoid: • Carburettor malfunctions • Starting...
Owners Manual - Page 30
...and condition.
Check that the electrode gap is undamaged, and replace it if necessary. On chain saws with regard to be turned regularly for wear. Replace when less than 0.024 inch (0.6...replace if necessary. Check that the chain catcher is 0.020 inch (0.5 mm). Clean the bar groove. File off any burrs from the engine, tank or fuel lines.
Clean the air filter. Clean the spark plug...
Owners Manual - Page 31
...33-50 12-19/31-49 0,325/8,25 0,050/1,3 0,058/1,5 Spur/7 17,3
440e TrioBrake
2,49/40,9 1,61/41 1,22/31 2900 1,8/2,4 @ 9000
NGK BPMR 7A/ Champion RCJ 7Y 0,02/0,5
0,78/0,37 13 0,53/0,25 Not ...Cylinder bore, inch/mm Stroke, inch/mm Idle speed, rpm Power, kW/hp @ rpm Ignition system
Spark plug
Electrode gap, inch/mm Fuel and lubrication system Fuel tank capacity, US pint/litre Oil pump capacity at 9,000...
Owners Manual - Page 32
.... The saw chain Husqvarna H30 is also classified as a sprocket-nose bar may use only the listed combinations of bars and chains for the Husqvarna chain saw chain outlined...04-08 TECHNICAL DATA
Recommended original and replacement bar and chain combinations
Following is a list of recommended cutting equipment for chain saw models Husqvarna 440e TrioBrake and 445e TrioBrake. As we are...
Owners Manual - Page 33
...lter and fuelfilter covered up to maintenance schedule. 4 Spark Plug, covered up to maintenance schedule 5 Ignition Module 6 Muffler with all applicable regulations adopted by Husqvarna Forest & Garden at all Husqvarna Forest & Garden authorized servicing dealers. The use small off -road engine. Husqvarna Forest & Garden will be grounds for the remaining warranty period. HOW TO...
Owners Manual - Page 34
...Spark Plug, covered up to the first scheduled replacement point for presenting your nearest authorized servicing dealer or call Husqvarna Forest & Garden...REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS
Any Husqvarna Forest & Garden approved replacement part used...new small nonroad engines must warrant the emission control system on your small nonroad engine, but Husqvarna Forest & Garden...
Operation Manual - Page 2
... individual. Both of the emission control devices and system may be used to cause cancer, birth defects or other reproductive harm.
115 13 80-49 Rev.1 2009-01-07
Tip contact may cause the guide bar to prevent unintentional starting, the spark plug cap must be avoided. In order to move suddenly upward and...
Operation Manual - Page 3
... 20 Fuel safety 20 STARTING AND STOPPING Starting and stopping 21 WORKING TECHNIQUES Before use 23 General working instructions 23 How to avoid kickback 29 MAINTENANCE General 31 Carburetor adjustment 31 Checking, maintaining and servicing chain saw safety equipment 31 Muffler 33 Starter 34 Air filter 35 Spark plug 36 Lubricating the...
Operation Manual - Page 35
...Replacing the return and drive springs
Air filter
Recoil spring (A)
• Lift up the starter pulley. Fit the cassette with a new...to avoid:
• Carburettor malfunctions
• Starting problems
• Loss of engine power
•...be cleaned completely. A HUSQVARNA chain saw can be replaced.
An air fi...replaced with recoil spring in use for advice.
115 13 80-49 Rev.1 2009-...
Operation Manual - Page 36
... on the spark plug electrodes, which causes damage to start or runs poorly at idle speed: always check the spark plug first before taking any further action.
Use of : 1 Air intake on the starter. 2 Air guide plate. 3 Fins on the flywheel. 4 Cooling fins on the output shaft.
Use the special grease gun and a good quality...
Operation Manual - Page 38
...Check that the stop switch works correctly. Lubricate the clutch drum bearing.
Replace if necessary. Clean the spark plug. Check that it is not clogged. Change if necessary.
English
115 13...that the electrode gap is 0.020 inch (0.5 mm).
Check that the bar and chain are getting sufficient oil. Clean or replace the spark arrestor screen on the machine. Replace when less than...
Operation Manual - Page 39
TECHNICAL DATA
Technical data
435
435e
440e
Engine Cylinder displacement, cu.in/cm3
2,49/40,9
2,49/40,9
2,49/40,9
Cylinder bore, inch... of ignition system
MBU-33
MBU-33
MBU-33
Spark plug
NGK BPMR 7A/ NGK BPMR 7A/ NGK BPMR 7A/ Champion RCJ 7Y/ Champion RCJ 7Y/ Champion RCJ 7Y/ Husqvarna PR 17Y Husqvarna PR 17Y Husqvarna PR 17Y
Electrode gap, inch/mm
0,02/0,5
0,02/0,5
0,02/0,5
Fuel...
Operation Manual - Page 42
... covered up to maintenance
schedule. 4 Spark Plug, covered up to maintenance schedule 5 Ignition Module 6 Muffler with catalytic converter 7 Fuel tank
WHAT IS NOT COVERED
All failures caused by CARB or EPA may be grounds for the performance of all Husqvarna Forest & Garden authorized servicing dealers. The use of a non-exempted add-on or...
Similar Questions
Won't Stay Running
bought brand new husqvarna weed trimmer. It won't stay starte
bought brand new husqvarna weed trimmer. It won't stay starte
(Posted by donnanne1960 1 year ago)
Starts But Does Not Run Under Load
The trimmer starts fine, but cannot Run in the non-choke position. It bogs down easily then quits. N...
The trimmer starts fine, but cannot Run in the non-choke position. It bogs down easily then quits. N...
(Posted by Brianj0628 4 years ago)
I Have A Husqvarna 440 And When I Let Go Of The Trigger It Shuts Off
(Posted by turkeystrut 9 years ago)
Trimmer Starts With Choke Open But Cuts Out Immediately When Closed
(Posted by Davepeschel 10 years ago)