Lexmark E250D Support Question
Lexmark E250D Support Question
Find answers below for this question about Lexmark E250D - E B/W Laser Printer.Need a Lexmark E250D manual? We have 4 online manuals for this item!
Question posted by scozio on July 11th, 2011
Blinking Lights
all the lights are blinking on the panel...I have already, changed the photodonductor, toner cartridge, shut the printer off for 5 minutes, disconnected the power cord from the electric receptical....how do I fix this problem...
Current Answers
Answer #1: Posted by LexmarkListens on July 11th, 2011 7:59 AM
LexmarkListens
Member since:
July 1st, 2011 Points: 1,410,540
Member since:
July 1st, 2011 Points: 1,410,540
Please reset the PC count on your printer. It is recommended that everytime you replace your photocondcutor you should also reset pc count. To do this, With the printer powered on, open the front door/cover. Press and hold the cancel button () until all the lights flash.
This indicates that the photoconductor page count has been reset.
Release the button and close the front door/cover.
Lexmark Listens
Phone:
USA: 1-800-539-6275
Canada: (877) 856-5540
UK: 0800 121 4726
South Africa: 0800 981 435
Related Lexmark E250D Manual Pages
Quick Reference - Page 4
... blink
Empty = Off
Printer Condition Complex page
Continue
Toner Low / Error Replace PC Kit
Load Paper
Paper Jam
Ready
Cancel job/ Reset printer
Load print media
Load manual feeder
Toner low
Toner cartridge region mismatch
Photoconductor kit life warning
Replace photoconductor (printer hard stop)
Programming engine code/ Programming system code
Understanding the control panel lights...
User's Guide - Page 4
... and photoconductor levels 78 Ordering a maintenance kit ...78 Recognizing the control panel light sequences 79
Changing the toner cartridge ...80 Changing the photoconductor kit ...82 Recycling Lexmark products ...84
Chapter 9: Troubleshooting 85
General problems ...85 Lexmark Status Messenger Utility ...86 Selecting printer operating mode ...86 Turning on Reduced Curl mode ...86
Print quality...
User's Guide - Page 9
Understanding the control panel lights
Common light sequences (continued) = On
= Blinking
= Slow blink
Empty = Off
Printer Condition Complex page
Page Continue 14
Error
Toner Low / Replace PC Kit Load Paper Paper Jam Ready
Cancel job/ Reset printer 15
Load print media
15
Load manual feeder
16
Toner low
16
Toner cartridge region 17 mismatch
Photoconductor kit life 17 warning
...
User's Guide - Page 16
... the printer off.
• Remove the toner cartridge, and shake it to extend the
life.
• Replace the toner cartridge. (See Changing the toner
cartridge on page80 for help.)
• Turn the printer back on.
16 What you to load a single sheet of print media in the toner cartridge is ready to reset the printer. Toner low
Light sequence:
• Continue-On • Toner Low...
User's Guide - Page 17
... Kit-Blinking
What this message to clear the light
sequence and continue printing.
• Replace the photoconductor kit.
See Changing the
photoconductor kit on page76).
What you can do I order them? What you can do:
Remove the toner cartridge, and install a new toner cartridge that matches the region of the installed toner cartridge.
Understanding the control panel lights...
User's Guide - Page 24
... panel lights
Secondary light sequences (continued) = On
= Blinking
= Slow blink
Empty = Off
Printer Condition Invalid engine code
Page Continue 34
Error
Toner Low / Replace PC Kit Load Paper Paper Jam Ready
Invalid network code
34
Toner cartridge region 34 mismatch
Change toner cartridge / 35 invalid refill
Missing / Defective toner 35 cartridge
Unsupported toner
36
cartridge...
User's Guide - Page 34
... them? Invalid network code
Light sequence:
• Ready-On • Load Paper-Blinking • Error-On
What this light sequence means:
The code in an internal print server has not been programmed, or the programmed code is not valid.
What you can do:
Remove the toner cartridge, and install a new toner cartridge that matches the region of...
User's Guide - Page 35
....
• Replace the toner cartridge. (See Changing the toner
cartridge on page80 for help .)
• Turn the printer back on . Understanding the control panel lights
Change toner cartridge/invalid refill
Light sequence:
• Toner Low/Replace PC Kit-On • Paper Jam-Blinking • Error-On
What this light sequence means:
The toner in the toner cartridge is getting low, or...
User's Guide - Page 36
...• Turn the printer off.
• Remove the toner cartridge, and replace it with a
supported toner cartridge. (See What supplies do I need and how do I order them? Understanding the control panel lights
Unsupported toner cartridge
Light sequence:
• Toner Low/Replace PC Kit-On • Load Paper-On • Error-On
What this light sequence means:
The toner cartridge is not supported...
User's Guide - Page 80
b Grasp the handle, pulling up and out to release and lower the front door.
3 Remove the toner cartridge. Changing the toner cartridge
Changing the toner cartridge
1 Turn the printer off. 2 Press the button on the base of the printer to remove the toner cartridge.
80 a Press the release button on the left side of the print cartridge assembly.
User's Guide - Page 81
... correctly installed.
7 Close the front door. 8 Turn the printer back on the tracks of the photoconductor and pushing the toner cartridge in all directions to Lexmark for more information.
5 Firmly shake the toner cartridge in as far as it will go. Changing the toner cartridge
4 Unpack the new toner cartridge. See Changing the photoconductor kit on page82 for recycling. Note: You...
User's Guide - Page 85
... the Reduce Curl setting from the Paper Type menu. The printer seems to smooth-textured envelopes.
Envelopes jam when printing with the low cartridge? light pattern means. Yes, you selected Envelope from the manual feeder. 9 Troubleshooting
General problems
Problem / Question
Solution / Answer
What do the blinking lights See Understanding the control panel lights on page86.).
User's Guide - Page 87
The Continue, Ready/Data, Toner Low and Load/Remove Paper light sequence will blink while the page is being formatted and printed.
Replace the toner cartridge or fuser* as needed.
Print quality problems
Many print quality problems can be changed using the Local Printer Settings Utility.
87 See the following in the order listed:
1 Clean the printhead lens...
User's Guide - Page 90
...technician. †This setting can be changed using the Local Printer Settings Utility.
• Replace the toner cartridge. • Call for service.
• Change Paper Weight† to the output bin
• The toner cartridge is sealed in its
original packaging.... media, such as a xerographic paper for laser printers.
• If possible, try printing in a less humid environment.
90
Service Manual - Page 27
... codes will follow this code. Common primary light patterns
See "Overview of the operator panel" on page 1-2 for side 2 of manual
z
duplex printing
¹ Toner low light will remain on
Light off
✷
Light blinking
x
Light blinking slowly
Common light sequences
4512-220, -230
Printer Condition
Page
Ready / Power Saver
4
Busy
4
Hex Trace Ready
4
Waiting
5
Flushing...
Service Manual - Page 71
With the printer off, disconnect the LVPS/HVPS cable from a different toner cartridge assembly and developer before proceeding. This is made between the cable (DEV, TAR, and doctor blade) connection PCN3 and on pins 7, 12, and 14. • If the voltage is correct and the toner electrodes are clean. If the toner cartridge and PC Kit are incorrect...
Service Manual - Page 72
...toner cartridge is not blocked. Variation in the printer driver. Try a new PC Kit. Note: Do not touch the transfer roll except at the proper temperature to fuse the toner to the paper. Check the springs in the printer driver.
2-48 Lexmark™ E250d...force against the PC (photoconductor) drum. Try changing the setting to make sure that the laser light path is low, try a new one....
Service Manual - Page 73
..., and replace as it feeds through the printer, especially in the developer and transfer process. With the printer off, check to make sure that the toner cartridge is not low on a page with a...-220, -230
Light print
FRU Toner cartridge (not a FRU)
Transfer roll LVPS/HVPS card
Action
Make sure the toner cartridge and PC Kit are installed correctly and that the laser beam is primarily...
Service Manual - Page 74
... problems Problem Light or blurred characters. Try a different toner cartridge. Replace the PC kit.
2-50 Lexmark™ E250d and E250dn
See "Toner on page 2-49 for debris.
• Make sure the media is straight and unwrinkled. • Replace the PC Kit, and recheck before replacing the toner cartridge. If the lines are usually caused by the laser beam...
Service Manual - Page 76
The Toner Low light is blinking, and the Error light is on the paper feed tires for burrs or debris that the ACM clutch...release , or open and close the printer cover to restart the printer. • Make sure the toner cartridge assembly is installed properly.
2-52 Lexmark™ E250d and E250dn The Load Paper light is on even though there is on . The printer does not print after picking. &#...
Similar Questions
I Have Changed The Toner In My Printer And The Toner Light Keeps Flashing.
(Posted by pennymorrison 10 years ago)
Lexmark Geographic Region E250d Printer Cartridge World
I have a Lexmark E250D and just tried to replace the toner cartridge with a 100% compatible toner an...
I have a Lexmark E250D and just tried to replace the toner cartridge with a 100% compatible toner an...
(Posted by murrayjfp 10 years ago)
If This Printer Will Not Power Up At All - Is There A Reset Button Somewhere On?
this printer has been powered off approx 1 month - now will not power back up. Is there a reset butt...
this printer has been powered off approx 1 month - now will not power back up. Is there a reset butt...
(Posted by joycessmitherman 12 years ago)
Toner Cartridge Region Mismatch Is In Error
Printer was working properly and printing several photos when I tried to use the manual tray. It sto...
Printer was working properly and printing several photos when I tried to use the manual tray. It sto...
(Posted by HobsonBoss 13 years ago)