Change Lightbulb

1. Unplug the refrigerator from the power outlet to ensure your safety.
2. Locate the lightbulb cover inside the refrigerator. It is usually located at the top of the refrigerator compartment.
3. Depending on the model, the lightbulb cover may be secured with screws or clips. If there are screws, use a screwdriver to remove them. If there are clips, gently press them inward to release the cover.
4. Once the cover is removed, you will see the lightbulb. Carefully remove the old lightbulb by twisting it counterclockwise.
5. Take note of the wattage and type of the old bulb to ensure you replace it with a compatible one. You can find this information on the bulb itself or in the refrigerator's user manual.
6. Insert the new lightbulb into the socket and twist it clockwise until it is securely in place.
7. Replace the lightbulb cover and secure it with screws or clips.
8. Plug the refrigerator back into the power outlet.
9. Test the new lightbulb by opening the refrigerator door. The light should come on.

1. Make sure the refrigerator is unplugged and the power is turned off before starting any work.

2. Locate the lightbulb cover on the inside of the refrigerator. It is usually situated towards the back or on the ceiling.

3. Carefully remove the lightbulb cover by gently pulling it down or sliding it out. Some covers may have screws or clips that need to be removed first.

4. Once the cover is removed, you should be able to see the lightbulb. Take note of the type and wattage of the current bulb so that you can replace it with a compatible one.

5. If the lightbulb is screwed in, unscrew it in a counterclockwise direction. If it's a push-and-twist type, gently press the bulb inward and then twist it counterclockwise to remove it.

6. Insert the new lightbulb and rotate it clockwise for screw-in bulbs or push-and-twist it in until it locks into place for the other type.

7. Once the new lightbulb is securely installed, replace the lightbulb cover by sliding or snapping it back into its original position.

8. Finally, plug in the refrigerator and turn on the power. The new lightbulb should now be lighting up your Sanyo SR3770S.

Remember, if you encounter any difficulties or have concerns about replacing the lightbulb, it's always a good idea to consult the owner's manual or contact Sanyo customer support for specific instructions related to your model.

1. Make sure the refrigerator is unplugged and the power is turned off before starting any work.

2. Locate the lightbulb cover on the inside of the refrigerator. It is usually situated towards the back or on the ceiling.

3. Carefully remove the lightbulb cover by gently pulling it down or sliding it out. Some covers may have screws or clips that need to be removed first.

4. Once the cover is removed, you should be able to see the lightbulb. Take note of the type and wattage of the current bulb so that you can replace it with a compatible one.

5. If the lightbulb is screwed in, unscrew it in a counterclockwise direction. If it's a push-and-twist type, gently press the bulb inward and then twist it counterclockwise to remove it.

6. Insert the new lightbulb and rotate it clockwise for screw-in bulbs or push-and-twist it in until it locks into place for the other type.

7. Once the new lightbulb is securely installed, replace the lightbulb cover by sliding or snapping it back into its original position.

8. Finally, plug in the refrigerator and turn on the power. The new lightbulb should now be lighting up your Sanyo SR3770S.

Remember, if you encounter any difficulties or have concerns about replacing the lightbulb, it's always a good idea to consult the owner's manual or contact Sanyo customer support for specific instructions related to your model.