Singer Heavy Duty 6800C Support Question
Singer Heavy Duty 6800C Support Question
Find answers below for this question about Singer Heavy Duty 6800C.Need a Singer Heavy Duty 6800C manual? We have 1 online manual for this item!
Question posted by Syltijerina on May 6th, 2022
Singer 6800c Heavy Duty
My Singer 6800C overlock stitch is stitching backwards. Straight stitch is fine. Any help with the overstitch would be greatly appreciated
Current Answers
Answer #1: Posted by Odin on May 6th, 2022 5:20 PM
Odin
Member since:
April 10th, 2010 Points: 41,236,620
Member since:
April 10th, 2010 Points: 41,236,620
Hope this is useful. Please don't forget to click the Accept This Answer button if you do accept it. My aim is to provide reliable helpful answers, not just a lot of them. See https://www.helpowl.com/profile/Odin.
Answer #2: Posted by SonuKumar on May 6th, 2022 11:15 PM
SonuKumar
Member since:
May 9th, 2021 Points: 16,673,770
Member since:
May 9th, 2021 Points: 16,673,770
Please respond to my effort to provide you with the best possible solution by using the "Acceptable Solution" and/or the "Helpful" buttons when the answer has proven to be helpful.
Regards,
Sonu
Your search handyman for all e-support needs!!
Related Singer Heavy Duty 6800C Manual Pages
User Manual - Page 2
... plug from outlet. • Do not unplug by the manufacturer or its intended use bent needles. • Do not pull or push fabric while stitching. This household sewing machine is designed to comply with any object into water. IMPORTANT SAFETY INSTRUCTIONS
When using this manual. Make sure to hand them over if the...
User Manual - Page 3
...should be done only by qualified service personnel. Children shall not play with the sewing machine.
The noise level under normal operating conditions is marked with the words 'DOUBLE ...'DOUBLE INSULATED'.
Children should be supervised to avoid a hazard.
• This sewing machine is provided with double insulation. Use only identical replacement parts. SAVE THESE INSTRUCTIONS...
User Manual - Page 4
... the Bobbin 12 Insert the Bobbin 12 Thread the Machine 13 Needle Threader 14 Needles 14
Important Needle Information 15 Selection Guide - Straight Stitch 24
Change Needle Position 24 Change Sewing Direction 25 Finish Sewing 25 Straight Stretch Stitch 25 Multi-Step Zigzag Stitch 26 Slant Overedge Stitch 26 Closed Overlock Stitch 27 Blind Hems 27 Darning and Mending 28
Repair...
User Manual - Page 5
... thread take up lever.
12. Stitch Control Panel - Press to start and stop sewing without using the foot control.
7. Display - Slide forward and view all stitches available on the web at www.singer.com. This product is not intended for your stitch settings with tension discs and take -up lever.
5. Machine Operation Controls - Feed Teeth Lever...
User Manual - Page 7
...straight and accurate sewing, e.g., when quilting. For sewing with your project. Brush and Seam Ripper - Insert the guide into the slot at the back of the bobbins is inserted in the machine...cord • Soft cover
Introduction - 3 English Used to remove stitches/brush off lint. Used to fit your machine (SINGER® Class 15 transparent bobbins).
Spool Cap - Used for ...
User Manual - Page 10
... of fabric together. forward, backward and forward again. Zigzag Stitch
Multi-Step Zigzag Stitch
Reinforced Zigzag Stitch
Overlock Stitch
Blind Hem F
Stitch Stretch Blind
F
Hem Stitch Slant Overedge Stitch
A very versatile stitch for sewing.
Straight Stitch Left Position
For all types of the fabric. When seam finishing, the smaller step of the stitches will help keep fabric more flat than...
User Manual - Page 11
..., coats, etc. Closed Overlock Stitch
Honeycomb Stitch
Seam/Overcast F
Stitch
Buttonhole
Sew decorative hems and overlapped seams, belts and bands. Rounded Bartack Buttonhole
Rounded Bartack Buttonhole, Reinforced Keyhole Buttonhole
Keyhole Buttonhole, Reinforced
Keyhole Buttonhole, Tapered
Keyhole Buttonhole, Rounded
Heavy Duty Buttonhole
Stretch Buttonhole
Bartack Stitch
For light weight...
User Manual - Page 13
... provide the best stitch result at normal room temperature. Unplug the power cord when the machine is adjusted to the Power Supply
Among the accessories you find the power cord and the foot control. Plug the cord into the wall socket.
3. To reduce the risk of electric shock, this sewing machine, foot control model...
User Manual - Page 14
... presser foot. The lever is used to provide a larger, flat
A
work surface. Raise the lever up for machine threading, lower it open the door by sliding it farther upwards, the lift height of the sewing machine head. Doing this will leave the thread ends long enough so that they are easily accessible.
Use...
User Manual - Page 18
...eliminate skipped stitches when there is too small for the thread the needle threader may not work properly. The metal flanges cover the needle. A small hook will prevent the machine from front... are using.
Preparations English
It is in needle threader allows you start to sew. Needles
The sewing machine needle plays an important role in a variety of thread beyond the needle eye...
User Manual - Page 19
... It can cause skipped stitches, breakage or snapping of the thread. linen, cotton/polyester blend, terrycloth, chambray,
double knit
Heavy weight fabrics: Canvas, wool, denim, home decor, fleece, heavy knit
110 (18)
Heavy weight fabrics: Coat weight wool, upholstery fabrics
Heavy duty thread for needle, with the flat side away from your sewing machine. Change the Needle
Note...
User Manual - Page 20
... on the underside of the fabric. For decorative stitches and buttonholes, the top thread should be visible ...heavy weight
fabrics, decrease for most fabrics, it comes to the "Feed Teeth Down" position.
2. Preparations English B
If the bobbin thread is visible on top of the machine...try to ensure
smooth feeding of the fabric while sewing. Note: If the dial is switched. Increase...
User Manual - Page 22
.... Release it to increase the speed.
The setting of a stitch or stitch program, press Automatic Thread Cutter while sewing.
Automatic Thread Cutter
Press the Automatic Thread Cutter button and your sewing machine have a pre-set, recommended sewing speed.
Long press to begin sewing and press again to stop sewing. To cut threads at the same time. You can...
User Manual - Page 24
...around the figures/icons will be will be activated each time the machine is set the position of your machine will move up /down is turned on the display (see ).... icon with the "Tie-Off". When the needle stop down to sew your sequence. If straight stitch with a left to elongate the selected stitch. Elongation
Press to right symmetrically across the center position.
Here you...
User Manual - Page 26
... you change the settings the frame around the figures will be will appear as the next stitch in the sequence.
5. The selected stitch number is active
Note: When the settings shown on the display (C). Operating Your Machine English Sequence Mode
Display in Sequence Mode
Press the Sequence button to enter Sequence mode. Recommended...
User Manual - Page 28
... a seam allowance guide line on your machine for straight stitch
A
Change Needle Position
Some sewing is a 1/4" (6mm) guide line. Place the top thread underneath the presser foot. To secure the beginning of the chart to the right.
Then continue sewing.
Fleece and denim fabric in mm E. Straight Stitch
Set your sewing machine.
Lower the needle to the point where...
User Manual - Page 29
... threads to change sewing direction, stop the machine.
Release the button and sew forward again to secure the stitch at the end of the seam. Note: You can be used for heavy stretch fabrics, for crotch seams which are cut the proper length and your project, press the Tie-Off button. The Straight Stretch Stitch can also...
User Manual - Page 31
... fabric (2).
• Finish the raw edge of fabric
Sewing - 27 English one is recommended for medium to heavy woven fabric (1), the other for medium to the wrong side and stitch with closed overlock stitch can be facing up for sewing medium to the wrong side. • Fold the hem back on skirts, trousers and home dé...
User Manual - Page 33
...presser foot. This stitch automatically sews small stitches back and forth to the corresponding length. Align the fabric so that locks the
3.5
4.0
3-5
foot in extra heavy fabric or a ... Foot to pass the thick parts
without needle breakage. Start sewing, the machine will release
automatically after a few stitches. The Buttonhole Lever should fit
C
between the button holder...
User Manual - Page 38
.... No lubrication (oiling) is
properly replaced, turn off the machine. Clean the area under the bobbin case after sewing several projects or any dust or lint built up .
Maintenance English...the feed teeth, replace and tighten the screws. Note: Do not blow air into your sewing machine operating well, clean it often. Wipe the exterior surface of the bobbin case (A) under the...
Similar Questions
What Does El Mean? Have It On Three Machines All 6600c
What does "EL" mean. Machine will not turn. Have it on three machines one is two days old. all 6600C...
What does "EL" mean. Machine will not turn. Have it on three machines one is two days old. all 6600C...
(Posted by jiminspectelev 8 months ago)
Heavyduty Singer Sewing Machine
where is the reverse button located
where is the reverse button located
(Posted by Anonymous-169702 2 years ago)
Singer 44s Heavy Duty Sewing Machine
can this machine be installed in a sewing machine cabine
can this machine be installed in a sewing machine cabine
(Posted by Lhcajun2004 4 years ago)
I Have A Heavy Duty Singer Sewing Machine (model 4432)
stopped sewing after bobbin replacement?
stopped sewing after bobbin replacement?
(Posted by sueisforme 9 years ago)