Denon AVR-1082 Support Question
Denon AVR-1082 Support Question
Find answers below for this question about Denon AVR-1082.Need a Denon AVR-1082 manual? We have 2 online manuals for this item!
Question posted by ajfalc on January 23rd, 2015
Avr-1082
I had a power surge from my Sub and now my receiver will not turn on
Current Answers
Answer #1: Posted by TechSupport101 on January 23rd, 2015 10:59 PM
TechSupport101
Member since:
May 24th, 2013 Points: 12,171,305
Member since:
May 24th, 2013 Points: 12,171,305
Hi. See if the Owner's Manual here makes any mention of a fuse which alone could have blown requiring replacement. Otherwise, the tranformer/adapter may need to be tested and replaced if found bad.
Related Denon AVR-1082 Manual Pages
Literature/Product Sheet - Page 1
... recreates all channels. The AVR-1082 includes Multi Zone Output and Power Amp Assign functions that let you take maximum advantage of 5.1-channel surround sound. Accordingly, the AVR-1082 boasts high output power of 150 W for superior reproduction of the original performance.
s Dolby Digital Decoding
s 96 kHz, 24-bit Audio D/A Converters
The high power custom transistor used in...
Literature/Product Sheet - Page 2
... VCR-1, VCR-2/V.AUX
s Video Outputs
1 Set Component Video Output .....
OPTICAL
s Video Inputs
2 Sets Component Video Input....... The AVR-1082's Power Amplifier Assign function lets you output different sources to...505 APPLE CREEK BLVD. OPTICAL X 3 1 Set Digital (Coaxial) Input COAXIAL
s Audio Outputs 8 Sets Analog PRE Output FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK L/R, ...
Owners Manual - Page 1
... SIDA 282 AV SURROUND RECEIVER
AVR-3802
OPERATING INSTRUCTIONS BEDIENUNGSANLEITUNG MODE D'EMPLOI ISTRUZIONI PER L'USO
INSTRUCCIONES DE OPERACION GEBRUIKSAANWIJZING BRUKSANVISNING
PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER AVR-3802 FUNCTION
REMOTE SENSOR
...
POWER
OFF
ON / SOURCE
RC-884 REMOTE CONTROL UNIT
TV
CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE VDP
DVD
DISPLAY SURR.
Owners Manual - Page 3
... A / V receiver. For heat dispersal, leave at least 10 cm of space between all the features the AVR-3802 has to offer, read these
instructions carefully and use the set the power switch to unplug the cord when you take the following parts are not problems with the connection cords.
until the muting circuit turns...
Owners Manual - Page 4
... the power of component video (Y, PB/CB, PR/CR) inputs for connections to composite video and "S" video switching, the AVR-3802 provides 2 sets of the this outlet is turned on and...the low frequency effects (LFE) channel benefit from the remote control unit or power switch.
Connections for audio equipment. Digital Surround Sound Decoding Featuring 32 bit high speed DSP, operating entirely...
Owners Manual - Page 6
...
Monitor TV
Connecting a DVD player
DVD IN jacks • Connect the DVD player's color difference (component)
video output jacks (COMPONENT VIDEO OUTPUT) to the color difference (component) video jacks. • The AVR-3802's on some TVs, monitors or video components ("CR, CB and Y", "R-Y, B-Y and Y", "Pr, Pb and Y", etc.).
Insert the 3. In addition, the video signals...
Owners Manual - Page 8
... INPUT mode indicators 23) @3 SIGNAL indicators 23) @4 Remote control sensor
(REMOTE SENSOR 16)
@5 Power indicator 22) @6 FUNCTION knob 23) @7 TUNING PRESET button 34) @8 SOURCE selector button 23) @9... ( ).
@9 @8 @7 @6 @5 @4 @3 @2 @1
@0
!9
PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER AVR-3802 FUNCTION
REMOTE SENSOR
ON / STANDBY
AUTO
SIGNAL DIGITAL
SURROUND BACK CH
OUTPUT
...
Owners Manual - Page 9
...Power AMP Assignment
Set this function when using the AVR...received automatically and stored in order to obtain optimum effects.
CURSOR buttons F and G: Use these parts, refer to the pages given in "CONNECTIONS" (see pages 4 to 8), make the various settings described below which the audio...12 ft)
Center 3.6 m (12 ft)
Sub Woofer 3.6 m (12 ft)
Surround L ...with other AV components have been ...
Owners Manual - Page 10
...of a video component. ENGLISH
NOTES: • The on-screen display signals are not output from the color difference (component) video signal
...modes.
Surround speaker systems
3
ENTER
SHIFT
With the AVR-3802 it is selected
• Surround speaker selector...
1 Check that all the connections are correct, then turn on the main unit's power.
2
SETUP
Display the System Setup Menu. When ...
Owners Manual - Page 13
... "Test Tone Mode". The "Surr. BAND
MODE
TUNING
Select the mode. Sp.: B Adjusts the balance of 0.1 meters (1 foot) each time the button is pressed.
The AVR-3802 automatically sets the optimum surround delay time for "Default", the settings are reset to the factory default values
(see page 27.) • When using...
Owners Manual - Page 14
... MATRIX. NOTES: • The OPTICAL 3 jacks on the AVR-3802's rear panel are emitted from the subwoofer
When the surround...channel level adjustments for the various selections of the component connected to the OPTICAL 3 OUT jack on the ...jack to "1spkr" for digital recording between a digital audio source (stereo - 2 channel) and a digital audio recorder. • Do not connect the output of ...
Owners Manual - Page 16
... carefully wipe the fluid off .
• On-screen display signals
Signals input to the AVR-3802
VIDEO signal input jack (yellow)
S-video signal input jack
1
E
E
2
C...; Do not press buttons on -screen display turns off the inside of the battery compartment and ...straight distance of approximately 7 meters from the color difference (component) video signal
MONITOR OUT jacks. • For 4 ...
Owners Manual - Page 17
...changers only) : 10 key
3. The display switches as follows each
6
"OK" is pressed.
2 Operate the audio component. • For details, refer to input the
7 8 9 preset code (a 4-digit number) for the ...SYS CALL
ENTER
RESET SHIFT
AUTO SEARCH
1
POWER
OFF
ON / SOURCE
RC-884 REMOTE CONTROL UNIT
3, 4 2, 3, 4
5
TV
CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE VDP
DVD
DISPLAY SURR.
...
Owners Manual - Page 23
... is being input to play signals other than audio signals, but no digital signal is "18...AVR- Input mode when playing DTS sources • Noise will be sure to connect the source component...the INPUT MODE button is turned on the selected component. • For operating instructions...digital input component setup (page 14) and connections are correct and whether the component's power is ...
Owners Manual - Page 26
... ZONE MUSIC ENTERTAINMENT SYSTEM (When using PREOUT)
ANOTHER ROOM
MAIN ROOM
INTEGRATED AMPLIFIER
B
AVR-3802
MULTI SOURCE AUDIO signal cable SPEAKER cable
* Refer to CONNECTIONS on pages 4 to 8.
2 MULTI ..."Multi" is selected at System Setup Menu "Power Amp Assignment". In this unit and the playback devices are installed. (Refer to 8.
26 RECEIVER
(Remote Control unit)
2 Press the input ...
Owners Manual - Page 28
...RECEIVER
VCR DBS/CABLE VDP
DVD
DISPLAY SURR.
or from the main unit's panel, press the SURROUND MODE button, then turn... the SELECT knob and select Dolby Pro logic or DTS NEO:6. NOTE: • There are automatically finalized and the normal display reappears after completing the settings. AUTO
DTS
MODE
1
3
B
31
2 4,5 2,6
POWER... surround parameters. The AVR-3802 sets the mode...
Owners Manual - Page 30
... contain 24 bit, 96 kHz audio).
Personal Memory Plus This set...component with a high performance DSP (Digital Signal Processor) which uses digital signal processing to achieve a more realistic, powerful...ENGLISH
11 DSP SURROUND SIMULATION
• The AVR-3802 is pressed, "CINEMA EQ." One of...multi surround speakers of movie theaters are
automatically turned off, "ROOM SIZE" is set for that...
Owners Manual - Page 37
...Pro Logic, DTS, high definition 3-1 signals (Japan MUSE Hi-Vision audio), DVD-Audio, SACD (Super Audio CD), MPEG multi-channel audio, etc. Using two speakers results in a smoother blend with more ...In this case it easy to achieve sound positioned directly behind the listening position.
The AVR-3802's surround speaker selection function makes it is recorded to use two speakers. Adding ...
Owners Manual - Page 39
...to the quietest, softest sounds, free from the most powerful sound effects to the digital input jack. In addition,...ch
Playback channels (max.)
L, R, C, SL, SR, SW
Audio processing
High frequency playback limit of FM radio, TV, satellite broadcasts...full range sound information, from Dolby Laboratories.
ENGLISH
Surround
The AVR-3802 is selected.
2 Sources recorded in Dolby Surround are ...
Owners Manual - Page 40
...is a multi-channel digital signal format developed by the AVR-3802, or may only produce noise. DTS features a... may possibly cause damage to "AUTO" or "DTS" before turning up the master volume.
3 A DVD player with DTS-compatible...components are lost.
2 DTS-ESTM Matrix 6.1 With this , be handled in -phase component is assigned mainly to the center channel (C) and the reversed phase component...
Similar Questions
Solution For Avr 1082, 2022 Lg, Optical, And Newer Tvs
This isn't a question. Just helpful information for those searching online for a solution. For you D...
This isn't a question. Just helpful information for those searching online for a solution. For you D...
(Posted by sofiecoco99 1 year ago)
How To Initialize The Microprocessor On A Denon Avr 1082 ?
(Posted by acamp0799 4 years ago)
Denon Avr 3312 Does Avr Power Need To Be Turned On To Watch Cable Tv Hdmi
(Posted by Davlepst 10 years ago)
How To Repair Denon Avr 1908 Receiver Turns On Then Shuts Off
(Posted by jswismyname 10 years ago)
