Hayward Max-Flo Support Question
Hayward Max-Flo Support Question
Find answers below for this question about Hayward Max-Flo.Need a Hayward Max-Flo manual? We have 2 online manuals for this item!
Question posted by DNDEPAUL02 on April 19th, 2013
How To Remove Motor Mounting Plate From Motor?
Removed motor via 4 long housing cap screws with attached seal plate and motor mounting plate. Want to mount new motor on old motor moiunting plate. Cant separate seal plate from motor mounting plate to remove from old motor. mode; SP2807X10. Don't want to force or rip internals.
Current Answers
Related Hayward Max-Flo Manual Pages
All Max-Flo II models - Page 1
Max-Flo II also features 2-inch threaded ports, a heavy-duty motor designed to operate in environments up to 122 degrees F, an elevated base for both new construction or as a... Hayward Max-Flo II™ is an ideal choice for improved motor cooling and to avoid unnecessary service calls, read this manual.
To prevent potential injury and to prevent flooding. Designed for pools of non...
All Max-Flo II models - Page 2
...as a means of access to prevent overheating of the motor. Closely supervise children
at
least every ten years, or...turn power supply OFF. Use of air for cooling. CAUTION - Max-Flo II ™ Series ____
____
_____
_ Page 2 of ...not securely attached.
This pump is constructed in a damp or nonventilated location. Pool and spa components have a finite life. A storable pool is constructed ...
All Max-Flo II models - Page 3
Max-Flo II™ Series _____ _____
_____
_____
Page 3 of electric shock replace damaged wiring immediately. Hazardous voltage can result in accordance with all
electrical wiring MUST be placed in an entrapment. To reduce the risk of 16
WARNING - It is damaged, broken, cracked, missing, or not securely attached...on the motor housing and to all metal parts of swimming pool, spa, or...
All Max-Flo II models - Page 4
... between cleanings. • Heavy-duty, high performance motor is also necessary to allow system water to return back to minimize the risk for burns. Max-Flo II™ Pump Series __________
_____
Page 4 of the Hayward Max-Flo IITM Series. Before starting the circulation system. Before servicing pool and spa circulation system, all system and pump controls...
All Max-Flo II models - Page 5
...Fasten pump to base or pad with screws or bolts to 5 pipe diameters,... when it rains. IMPORTANT NOTES - Pump Mounting
Install pump on pipe or hose joints. ..., rigid, and vibration free. Keep motor clean. Pipe Sizing Chart
MAXIMUM RECOMMENDED SYSTEM...Max-Flo II ™ Series__________
Product Specifications
_____
Page 5 of short, direct suction pipe (to water level as close to pool...
All Max-Flo II models - Page 6
...Fittings
Fittings restrict flow. Pool and spa fittings MUST conform to...stops. All electrical wiring MUST be new or thoroughly cleaned before connecting to... Max-Flo II ™ Series __________ Pump Mounting (cont'd)
_____
Page 6 of a
swimming pool ...seal threaded connections on electrical connections. If leaks occur, remove connector, clean off old Teflon tape, re-wrap with the motor...
All Max-Flo II models - Page 7
.... Allow no more than 50 psi (345 kPa) at a water temperature no longer than 110% of swimming pool, spa, or hot tub.
Max-Flo II ™ Series _ _________
_____
Page 7 of 16
Electrical (cont'd.)
Voltage
Voltage at motor MUST NOT be more than 100° F (38° C). 5.
Use the load circuit breaker as filter air...
All Max-Flo II models - Page 8
... to starting pump after pump is non- Keep motor dry and covered during storage. Strainer housing must be filled prior to freeze will prime itself when suction and outlet valves are opened. If water source is lower than the pump, pump will void the warranty. Max-Flo II ™ Series
Page 8 of 16
Starting...
All Max-Flo II models - Page 9
... cap/canopy away from the motor by removing the base screw (item #7) with a Phillips head screwdriver.
7. Rotate the impeller (item #10) counterclockwise and remove. WARNING -
Remove the seal plate (item #13) from the motor.
4. Exercise extreme care in handling both the rotating and the stationary sections of the pump/strainer housing (item #4), exposing the diffuser(item #9). Max-Flo...
All Max-Flo II models - Page 10
... seal plate (item#13), aligning the three (3) protruding pins with wrench as noted in a clockwise direction. Replace two diffuser screws (item #7). Tighten alternately and evenly to pump/strainer housing (item#4) using the two (2) hex shaped screws. Note: Arrow on page 11 of this page. Max-Flo II ™ Series
Page 10 of the ceramic seat.
Slide the motor...
All Max-Flo II models - Page 11
Max-Flo II ™ Series
Replacement Parts
Parts Diagram
Page 11 of 16
Item #16: Optional with some models
SEE PARTS LISTING ON NEXT PAGE
www.haywardpool.com
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
All Max-Flo II models - Page 12
...
Impeller for 1 ½ HP Max-Rate Pump
10
SPX2715CM
Impeller for 2 HP Max-Rate Pump
10
11 GMX600F
Housing O-Ring
10
12 SPX2700SA
Shaft Seal Assembly
10
13 SPX2700E
Seal Plate
10
14 SPX3200Z5
Motor Bolt
1
15 SPX2700G
Motor Support
1
Optional
16 SP2700UNKIT Union Connector Kit (Includes 2 Nuts,
1
Connectors, Gaskets)
Motors
SPX2705Z1M Motor, ¾ HP, Threaded Shaft...
All Max-Flo II models - Page 13
.... Loose connections on pool wall. 3. Solution: Remove strainer housing cover or skimmer cover, clean basket, and refill strainer housing with an "automatic thermal overload protector." If pump does not develop a vacuum and pump has sufficient "priming water": i. Manually check rotation of "Shaft Seal Change Instructions" in position.
Your Hayward pump motor is rotating at full...
All Max-Flo II models - Page 14
...new seal... Pool Products, 2005 All rights reserved. Motor ...pool, and unrestricted discharge return lines. Solution: Re-tighten using Teflon tape. 5. Air leak in pump housing. Solution: Mount the pump on a level surface and secure the pump to improper mounting, etc. backwash as per manufacturer's instructions; D.E. www.haywardpool.com
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS Max-Flo...
All Max-Flo II models - Page 15
...long... Pool Products, 620 Division Street, Elizabeth, New Jersey, warrants its pump housing/...Pool Products warranty does not apply to : Hayward Pool Products, 620 Division Street, Elizabeth, NJ 07207, Attn: Warranty Dept.
removal...Max-Flo II ™ Series
___
Page 15 of Hayward Pool Products.
Mail to components manufactured by the respective manufacturer will apply. Hayward Pool...
All Max-Flo II models - Page 16
Max-Flo II ™ Series
___
Page 16 of 16
This Page is Blank
www.haywardpool.com
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
All Max-Flo models - Page 1
...Motor must be readily disassembled for plastics, i.e., Teflon tape, Permatex No. 2, etc. WARNING - It is U.L. A storable pool... level.
STARTING AND PRIMING INSTRUCTIONS
Fill strainer housing with hot tubs and spas if so marked. IS2800X5-99
W Y W Y Hh h h h h h h h h h h f @@@@@@h h h h h h h h h h h h M h h 0 M O 2 6 K f f ... MAX-FLO™...seal. Never operate ...
All Max-Flo models - Page 3
... new seal and ceramic seat assembly. Protect remaining strainer housing assembly from the elements by removing the two
(2) screws.* 4. NOTE: Before reactivating pump, thoroughly clean and remove scale, dirt, etc. MAX-FLO™
GENERAL
Exercise extreme care in dry, well-ventilated room. The lapped and polished surfaces may contribute to the pump/ strainer housing. 2. motor, hold the motor...
All Max-Flo models - Page 4
... (Amperage reading)
NOTE:
Your Hayward pump motor is equipped with water and that pool water level is reached. Remove and replace shaft seal. Motor bearings made unserviceable by undersized wiring).
3. C.
Check for : 1. Vibration due to speed. 3.
undersized pool piping. 2. Rev. 7/99 A
© 1999 Hayward
Printed in pump housing. 5. SINGLE PHASE
VOLTS
CIRCUIT BREAKER BRANCH...
Similar Questions
What Size Are The Hayward Super Pump Series 1600 Motor Cap Screws?
(Posted by tomhans82 10 years ago)
1 Hp Hayward Sp5500z2 Pool Pump Power Flo Matrix Motor Wont Start
(Posted by Rvesjeevi 10 years ago)
Where Does The Neutral Go Inside The Motor .
When you change the motor to 110 from 240 where does the neutral go in the motor there is no scamati...
When you change the motor to 110 from 240 where does the neutral go in the motor there is no scamati...
(Posted by ericbuckalew067 10 years ago)
What Size Are These Screws Motor Cap Screw 4 Spx125z4 ?
what size are these screws MOTOR CAP SCREW 4 SPX125Z4 ?
what size are these screws MOTOR CAP SCREW 4 SPX125Z4 ?
(Posted by pdavis188 12 years ago)
