Pioneer VSX-524-K Support Question
Pioneer VSX-524-K Support Question
Find answers below for this question about Pioneer VSX-524-K.Need a Pioneer VSX-524-K manual? We have 1 online manual for this item!
Question posted by sergedub on January 2nd, 2021
Plus De Son
Après avoir connecté un projecteur hdmi (ouvert) j'ai perdu le son et la fonction de reset du fabriquant ne fonctionne pas. Pouvez vous m'aider?
Current Answers
Answer #1: Posted by Odin on January 3rd, 2021 1:21 AM
Odin
Member since:
April 10th, 2010 Points: 41,236,630
Member since:
April 10th, 2010 Points: 41,236,630
Possible solutions:
- Use VOLUME to turn up the volume.
- Press MUTE on the remote control to turn muting off.
- Set the SIGNAL SEL to H (HDMI), C1/O1 (digital) or A (analog) according to the type of connections made.
- Make sure the component is connected correctly .
- Check the audio output settings of the source component.
- Refer to the instruction manual supplied with the source component
For additional guidance see page 10 and page 22 of https://www.manualslib.com/manual/916359/Pioneer-Vsx-524-K.html.
If the issue persists or if you require further advice--or if the instructions don't seem to apply--you'll have to consult the company; use the contact information at https://www.contacthelp.com/pioneer/customer-service.
Hope this is useful. Please don't forget to click the Accept This Answer button if you do accept it. My aim is to provide reliable helpful answers, not just a lot of them. See https://www.helpowl.com/profile/Odin.
Related Pioneer VSX-524-K Manual Pages
Owner's Manual - Page 1
AV Receiver
VSX-524-K
Register your product on
http://www.pioneerelectronics.com (US) http://www.pioneerelectronics.ca (Canada)
• Protect your new investment
The details of your purchase will ...
Owner's Manual - Page 4
... equipment
Placing the speakers 10 Hints on the speaker placement 10
Connecting the speakers 11 Making cable connections 12
HDMI cables 12 About HDMI 12 Analog audio cables 13 Digital audio cables 13 Standard RCA video cables 13 About video outputs connection 13 Connecting a TV and playback components 14 Connecting using the Auto MCACC setup 20
04 Basic playback
Playing...
Owner's Manual - Page 5
... the sound. • Placing the speakers (page 10) • Connecting the speakers (page 11)
2 Connecting the components For surround sound, you'll want to hook up for surround sound ... kitchen)
The unit is vibration or other than the recommended connections.) The HDMI Setup menu (page 33) (When the connected TV supports the HDMI Audio Return Channel function.)
5 Use the on a...
Owner's Manual - Page 6
... NEO:6, and the Auto level control stereo mode (page 26). Used to select preset radio stations (page 25).
6 HDMI indicator
Blinks when connecting an HDMI-equipped component; Dims or brightens the display. When the headphones are connected, there is output from the speakers. Switches between the modes of this receiver. Use with TUNE /...
Owner's Manual - Page 7
... is switched on or not (page 6). HD - Lights to connect your Apple iPod or USB mass storage device as an audio source (page 17). Display
17 PHASE
Lights when the Phase Control...on page 26 for more on (page 26).
19 Tuner indicators
ST - HDMI -
Lights when a source with Dolby Digital Plus encoded audio signals is not provided. Lights when a normal broadcast channel.
PRESET - When...
Owner's Manual - Page 8
...
4
5
6
CH
7
8
9
CH
CLR
0
ENTER
17
RECEIVER
Controls and displays
As for operating other Pioneer components with the remote control.
6 SIGNAL SEL
Press to switch on /off Acoustic Calibration EQ setting (page 27). Press to select the audio input signal of 2 Pro Logic II and NEO:6, and the Auto level control stereo mode...
Owner's Manual - Page 9
... a car or near a device that have different
voltages. Insert the plus and minus sides of remote control
The remote control may have a longer... rays. • The receiver is output from the speakers connected to this unit. When disposing of the TV. Cannot use... speaker is set at SMALL in direct sunlight or other component controls
Use the number buttons to directly select a radio...
Owner's Manual - Page 10
....
• If you put your speakers as earthquakes.
10 Chapter
2 Connecting your equipment
Placing the speakers
By connecting the left and right front speakers (L/R), the center speaker (C), the left and... a center speaker, place the front speakers at a wider angle. to 3 m (6 ft. For DVD-Audio, the speakers should be enjoyed. to 9 ft.) apart, at equal distance from the TV.
• ...
Owner's Manual - Page 12
... cause a humming noise from your component or display. Dolby Digital, Dolby Digital Plus, DTS, High bitrate audio (Dolby TrueHD, DTS-HD Master Audio), DVD-Audio, CD, SACD (DSD 2 ch only), Video CD, Super VCD
• 4K signal transfer
- Due to 8 channels
• Input of the following digital audio formats: -
About HDMI
The HDMI connection transfers uncompressed digital video, as...
Owner's Manual - Page 13
...) video inputs of video connection and are typically red and white, and you use a standard RCA video cable for connecting to connect analog audio components. The signals input from the HDMI OUT. 2
Connecting your equipment
Analog audio cables
Use stereo RCA phono cables to the TV.
Playback component
4 6 34
Terminal for connection with source device
IN HDMI
IN VIDEO
Terminal for...
Owner's Manual - Page 14
..., 4K/25p,
4K/24p. • (DVD)- 4K/30p, 4K/25p, 4K/24p.
2
Connecting a TV and playback components
Connecting using HDMI
If you have an HDMI or DVI (with audio cables (as shown). - Please refer to connect. MONITOR OUT
This connection is connected to a compatible TV with an HDMI cable, and you switch the input of the TV to TV. VIDEO...
Owner's Manual - Page 15
..., please use a different method to the optical input terminal. If connecting other playback component) with no HDMI terminal to the receiver.
2
Connecting your equipment
Connecting your component with no HDMI
terminal
This diagram shows connections of the TV over the receiver. In order to listen to the audio from the TV that is required (see The Input Assign menu...
Owner's Manual - Page 17
...iPod/iPhone
Note • When the ARC function is ON and the receiver is
connected to a compatible TV with an HDMI cable, and you switch the input of this receiver.
If this happens, switch the...input, or turn OFF the ARC function (see The HDMI Setup menu on page 33). Connecting a USB device
It is possible to listen to two-channel audio using the controls of the TV when the receiver's ...
Owner's Manual - Page 21
...component (for C1, and the optical 1 audio input is being performed properly.
Once it is coming from the speakers connected to the source component... TrueHD, Dolby Digital Plus, DTS-EXPRESS, DTS-HD Master Audio and DVD Audio (including 192 kHz)....an analog signal. The compatible signals via the HDMI terminals are off (see
Selecting the audio input signal below).
4 Press AUTO/DIRECT to ...
Owner's Manual - Page 22
... this to each terminal, select the input by doing the following. Video/Audio (HDMI)
DVD SAT/CBL GAME BD
Audio
DVD SAT/CBL SIGNAL SEL
A
Audio (TV input)
1. TV
2. Tip • In order to enjoy the picture and/or sound from devices connected to TV input, please change the settings in the Input Assign menu...
Owner's Manual - Page 28
...Audio options
There are connected.
1 Press RECEIVER , then press AUDIO PARAMETER button.
2 Use / to select the setting you want to adjust. If two waveforms are listed in the following cases:
- Setting/What it as necessary. M/L OFF MIDNIGHT LOUDNESS
S.RTV (Sound Retriever)b
When audio...type of movies at your subwoofer to the plus (+) sign (or 0°). When the ...
Owner's Manual - Page 29
...The audio
delay time is only available when the connected display supports the automatic audio/video synchronizing capability ('lip-sync') for HDMI.
...Digital, DTS, Dolby Digital Plus, Dolby TrueHD, DTS-HD and DTS-HD Master Audio (you find the automatically...using a center speaker) Spreads the center channel between components
connected with most SACD discs, but if the sound distorts, it ...
Owner's Manual - Page 31
... setup option. • Manual - Choose the PLUS setting if you want the subwoofer to output bass sound continuously or you didn't connect surround speakers choose NO (the sound of the surround... Home Menu. 2 Select 'Channel Level' from other speakers or subwoofer. If you did not connect a subwoofer choose NO (the bass frequencies are also routed to YES.
Channel Level
Using the channel...
Owner's Manual - Page 34
...LARGE / Subwoofer: PLUS (page 30 ). The HDMI indicator blinks and the power does not turn OFF the HDMI CONTROL setting on... ARC function is the
case, listen to the TV audio after going through the checks below, ask your receiver...HDMI), C1/O1 (digital) or A (analog)
according to the type of connections made (page 21). Make sure the component is connected correctly (see
Connecting...
Owner's Manual - Page 35
... HDCP-compatible. If this unit's HDMI OUT terminal during playback, or disconnecting/connecting the HDMI cable during playback, may be recognized. Switch off the device connected to this doesn't seem to work , try resetting your TV. HDMI
No picture or sound. If the problem still persists when connecting your HDMI
component directly to your monitor, please consult...
Similar Questions
I Have Problem With My Vsx 524 Receiver Hdmi Monitor Out Put No Display Showing
(Posted by john68peter 1 year ago)
Hdmi Light Blinking
Hello,I have a VSX-524 Pioneer receiver. I plugged my Amazon Fire tv into one of the HDMI ports. Now...
Hello,I have a VSX-524 Pioneer receiver. I plugged my Amazon Fire tv into one of the HDMI ports. Now...
(Posted by pamps 2 years ago)
Pioneer Vsx 822 K Will Not Work With Tv Hdmi Installed
(Posted by minelle 10 years ago)